Unit of competency Outline

Date retreived
22/07/2026 5:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct Operational Checks on In-service Electrical Plant

Conduct Operational Checks on In-service Electrical Plant

Unit of competency
National Code
UEPOPS353A
State Code
S5239
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
31/05/2011
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
31/05/2011
Nominal Hours
20
Description
1)
This unit deals with the skills and knowledge required to conduct operational checks on in-service electrical plant.
Notes
Elements and Performance Criteria
1 Plan for plant in-service checks
  • 1.1 Safety issues are identified to comply with enterprise/site requirements
  • 1.2 Work, plant and resource requirements are identified from relevant information, requests, work orders or equivalent and documentation.
  • 1.3 Plant status and work requirements are clarified/confirmed with appropriate parties or by site inspection
  • 1.4 Equipment is check for correct calibration, operation. correct size, type and quantity of materials/components are determined, obtained and inspected for compliance with the job specifications
  • 1.5 Potential hazards are identified and prevention and/or control measures are selected in accordance with the work plan and site procedures
  • 1.6 Pre access checks are carried out in accordance with enterprise and site requirements
  • 1.7 Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training
2 Carry out in-service electrical checks
  • 2.1 Systems/plant is operated in accordance with enterprise/site and manufacturer operating procedures
  • 2.2 In-service electrical checks are done in conjunction with others involved in, or affected by, the work in accordance with the work plan
  • 2.3 Plant checks are monitored and observed to detect deviations from normal operation
  • 2.4 Corrective actions are taken to rectify abnormalities in accordance with manufacturer and enterprise/site procedures
  • 2.5 In-service checks are performed in accordance with defined enterprise procedures.
  • 2.6 System/plant integrity and personnel safety are maintained through consultation with appropriate personnel, and reference to plant, technical and operational documentation
3 Complete the work
  • 3.1 When checks are completed, control measures are returned to required operational status where appropriate.
  • 3.2 Appropriate personnel are notified of the completion of work in accordance with enterprise/site procedures
  • 3.3 Plant problems or abnormalities are reported and logged in accordance with enterprise/site procedures
  • 3.4 Check results are interpreted and documented in accordance with enterprise/site procedures
No information
No information
Replaced By
State Code National Code Title Type
WE386 UEPOPS371A Carry out operational checks on in-service electrical plant Unit of competency