Unit of competency Outline

Date retreived
23/07/2026 2:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out preparatory energy sector work activities

Carry out preparatory energy sector work activities

Unit of competency
National Code
UEECD0008
State Code
OBZ46
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to carry out preparatory energy sector work activities.It includes planning and carrying out energy sector work support activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan energy sector support activity
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied
  • 1.2 WHS/OHS hazards are identified, risks assessed and control measures implemented for energy sector work preparation
  • 1.3 WHS/OHS hazards not previously identified are noted on job safety assessments and advice is sought from work supervisor
  • 1.4 Work instructions are obtained and the nature, scope and location of work is determined from the supervisor or appropriate person/s
  • 1.5 Advice is sought from supervisor or appropriate person/s to ensure work is coordinated effectively with others
  • 1.6 Materials required for work are determined in accordance with workplace procedures
  • 1.7 Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety
2 Undertake energy sector support activity
  • 2.1 WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2 Plant and equipment are checked in accordance with manufacturer guidelines/instructions, WHS/OHS requirements and workplace procedures
  • 2.3 Mechanical equipment is installed straight and square in the required locations and within acceptable tolerances in accordance with relevant industry standards
  • 2.4 Hand and power tools are used in accordance with safe working practices and WHS/OHS requirements and workplace procedures
  • 2.5 Work instructions are carried out under supervision
  • 2.6 Unplanned events are referred to relevant supervisor and directions are followed in accordance with workplace procedures
3 Complete energy sector work activity
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Work site is cleaned and made safe in accordance with workplace procedures
  • 3.3 Supervisor is notified of work completion in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC427 UEENEEE122A Carry out preparatory energy sector work activities Unit of competency