Unit of competency Outline

Date retreived
22/07/2026 1:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install, configure and test local area network switches

Install, configure and test local area network switches

Unit of competency
National Code
ICTTEN525
State Code
OCV54
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/01/2021
View on TGA
State Implementation and Classification
Approved Date
29/03/2021
Field of Education
020113 - Networks And Communications
Original Release Date
29/03/2021
Nominal Hours
55
Description
This unit describes the skills and knowledge required to conduct local area network (LAN) switch installation, configuration and testing in field work. It also applies to switching protocols and diagnostics required for integrating new and converging functionalities to the network.It applies to individuals, employed by network companies and information communications technology (ICT) networking provisioning companies, who carry out installation, maintenance and upgrade of ICT networks.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install LAN switches
  • 1.1 Obtain work details, change management procedures and scope from relevant personnel and arrange for site access in compliance with required security arrangements, legislation, codes, regulations and standards
  • 1.2 Document LAN topology according to organisational requirements
  • 1.3 Obtain current and future network capacity predictions from relevant personnel
  • 1.4 Specify the number and type of switch required, with reference to future network requirements
  • 1.5 Specify requirements for network management and security according to organisational requirements
  • 1.6 Select the switch and switch operating system software version with required features according to required specifications
2. Install and configure LAN switches
  • 2.1 Assemble, rack mount and connect switch and peripherals according to manufacturer requirements
  • 2.2 Connect user to access points using cable that meets required standard
  • 2.3 Establish a valid network connection with other network devices
  • 2.4 Configure the network internet protocol (IP) address for the switch
  • 2.5 Install and configure simple network management protocol (SNMP) agent software according to network requirements
  • 2.6 Collect network traffic data for the management information base (MIB) according to network requirements
  • 2.7 Install and configure SNMP management console software on a computer designated to be the network manager’s main console
  • 2.8 Manually configure user access ports of the switch for speed and full or half-duplex operation
3. Test and reconfigure LAN switches
  • 3.1 Test the switch and other network devices according to manufacturer requirements and organisational guidelines
  • 3.2 Test to confirm connectivity across the network
  • 3.3 Modify the network to verify SNMP management software
  • 3.4 Make adjustments to the network, depending on test and troubleshooting results
4. Complete documentation and clean worksite
  • 4.1 Tabulate test results and complete all user reports
  • 4.2 Complete report and notify client of network status
  • 4.3 Clean up and restore worksite to client requirements
  • 4.4 Secure sign-off from relevant personnel
No information
No information
Replaces
State Code National Code Title Type
AWD07 ICTTEN513 Install, configure and test a local area network switch Unit of competency
State Code National Code Title Type
BGJ4 ICT50220 Diploma of Information Technology Qualification
BFF9 ICT40120 Certificate IV in Information Technology Qualification