Unit of competency Outline
Date retreived
22/07/2026 1:05 AM AWST
22/07/2026 1:05 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble simple blocked millinery components
Assemble simple blocked millinery components
Unit of competency
National Code
LMTML2008A
LMTML2008A
State Code
W7415
W7415
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Field of Education
030107 - Garment Making
Original Release Date
15/10/2014
Nominal Hours
90
Description
This unit covers the skills and knowledge required to perform the tasks associated with assembling blocked millinery components. It also involves the preparation of components.
Notes
Elements and Performance Criteria
1 Confirm assembly requirements
- 1.1 Requirements for the headwear component assembly are confirmed
2 Prepare components for assembly
- 2.1 Millinery components to be used are obtained
- 2.2 Components are pinned, tacked or otherwise prepared for assembly
3 Assemble the components
- 3.1 Components are sewn by hand or machine or glued together to ensure conformance to design requirements
- 3.2 Assembled components are inspected to ensure workplace quality standards are met
- 3.3 Non-conformance to standards are identified
- 3.4 Faults are reported and recorded, where required,
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Assemble the components may include
woven straw
straw braid
fabrics
fur
skin
felt
Machines and equipment may include
standard sewing machine
overlocker
hot glue gun
wiring machine
iron
steamer
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Assemble the components may include
woven straw
straw braid
fabrics
fur
skin
felt
Machines and equipment may include
standard sewing machine
overlocker
hot glue gun
wiring machine
iron
steamer
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
prepare components and materials for assembly
assemble the components and materials
operate machines and equipment, including heat and steam equipment, which are relevant to the competency and used within the enterprise
recognise non-conforming outcomes
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
prepare components and materials for assembly
assemble the components and materials
operate machines and equipment, including heat and steam equipment, which are relevant to the competency and used within the enterprise
recognise non-conforming outcomes
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2721 | LMTPRHM04A | Assemble blocked headwear components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV11 | MSTML2008 | Assemble simple blocked millinery components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D199 | CUF40507 | Certificate IV in Costume for Performance | Qualification |