Unit of competency Outline

Date retreived
22/07/2026 3:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install networked security systems

Install networked security systems

Unit of competency
National Code
CPPSEC4016
State Code
OBI71
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
029901 - Security Science
Original Release Date
20/05/2020
Nominal Hours
30
Description
This unit specifies the skills and knowledge required to install a range of networked security systems. It includes installing and configuring a range of software, hardware and new components in a network and performing tests to determine operational effectiveness.This unit is suitable for those using specialised knowledge to complete routine and non-routine tasks and using their own judgement to deal with predictable and sometimes unpredictable problems.Legislative, regulatory or certification requirements apply in some states and territories to the provision of advice on security solutions, strategies, protocols and procedures. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Prepare to install networked security system.
  • 1.1 Access and interpret key requirements of legislation, regulations and workplace policies and procedures, including work health and safety (WHS), and apply to work instructions to ensure compliance.
  • 1.2 Review work instructions to confirm client and site requirements and work timeframes.
  • 1.3 Review AS/NZS2201.1:2007 Intruder alarm systems – Client’s premises – Design, installation, commissioning and maintenance (AS/NZS 2201) and National Construction Code (NCC) to understand and apply requirements associated with installing networked security systems.
  • 1.4 Review security system architecture and configuration documentation and source information to clarify installation requirements.
  • 1.5 Confirm location and availability of networked security system components.
2 Plan and organise work tasks.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required materials, tools, testing devices and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Arrange access to installation site in consultation with relevant persons.
  • 2.4 Identify hazards in the work area and apply risk control measures.
  • 2.5 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
3 Perform installation of networked security system.
  • 3.1 Obtain authorisation to install networked security system according to workplace requirements.
  • 3.2 Isolate circuits according to WHS requirements.
  • 3.3 Install cabling and check to ensure compliance with regulatory requirements.
  • 3.4 Install networked security system hardware, software and components according to manufacturers’ instructions.
  • 3.5 Configure system hardware and software according to manufacturers’ instructions and work instructions.
  • 3.6 Conduct procedures to ensure security of system connections over internet protocol network.
  • 3.7 Conduct performance tests to ensure system operation meets prescribed parameters and specifications.
4 Finalise installation and documentation.
  • 4.1 Complete and secure installation documentation to maintain client confidentiality.
  • 4.2 Notify work completion to relevant persons.
  • 4.3 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.4 Clean and restore work area and remove waste caused by installation tasks.
No information
No information
Replaces
State Code National Code Title Type
D1466 CPPSEC4016A Install networked security system Unit of competency
State Code National Code Title Type
BEW9 CPP40719 Certificate IV in Security Management Qualification
BEW8 CPP41519 Certificate IV in Security Risk Analysis Qualification