Unit of competency Outline

Date retreived
23/07/2026 5:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Load and unload plant

Load and unload plant

Unit of competency
National Code
RIIHAN308F
State Code
OAK80
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
16
Description
This unit describes the skills and knowledge required to load and unload plant.This unit applies to those working in site-based roles.Prior to performing this activity, skills and knowledge should be developed for the individual plant. This can be achieved through completing the equivalent operator unit or being assisted by someone who has this knowledge. Refer to the Implementation Guide for further details. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
Notes
Elements and Performance Criteria
1. Prepare to load and unload plant
  • 1.1 Access, interpret and apply load handling documentation to ensure work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work requirements
  • 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Obtain and display signage, and erect barriers to isolate the loading and unloading site from general traffic flow in line with safe work practices
2. Load the plant in line with established requirements
  • 2.1 Confirm the dimensions and capacity of the float or trailer to safely carry the plant
  • 2.2 Select tools and loading equipment in line with work requirements
  • 2.3 Identify faults, and rectify or report prior to commencement of work, within scope of own responsibility and according to workplace procedures
  • 2.4 Confirm preparation procedures of the plant for transportation has been completed
  • 2.5 Place and secure loading aids in line with workplace procedures
  • 2.6 Confirm the loading procedure with operator and/or guide before loading commences
  • 2.7 Move the plant item onto the trailer or float and halt at the designated position as per workplace procedures
  • 2.8 Secure plant to trailer or float in line with workplace procedures
3. Unload the plant in line with established requirements
  • 3.1 Confirm the unloading procedure with operator and guide before unloading commences
  • 3.2 Place and secure unloading aids, including ramps, in accordance with the trailer or float specifications
  • 3.3 Slacken securing devices and remove according to workplace procedures
  • 3.4 Move the plant item off the trailer or float and halt at the designated position
  • 3.5 Stow loading aids including ramps, bridging materials and securing devices as per workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWB89 RIIHAN308E Load and unload plant Unit of competency