Unit of competency Outline

Date retreived
22/07/2026 6:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a vacuum loading system

Operate a vacuum loading system

Unit of competency
National Code
MSMWJ303
State Code
AWC04
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/05/2016
Nominal Hours
35
Description
This unit of competency covers the skills and knowledge required to operate a vacuum loading system which may be used to move materials from an open space or vessel into a container. The materials moved may be solids (lump or particulate), liquids or gases/vapours. The materials may also be hazardous (chemical hazard, flammable/explosive, and particulate carbonaceous particulates).Work will be undertaken on a worksite which may be a client's site or may be public space.Operators will also need to be competent in a range of other units of competency in order to be allowed to operate independently on site. No other licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Obtain required job details
  • 1.2 Complete site access and work control requirements
  • 1.3 Identify site hazards and required hazard controls
  • 1.4 Select, check and load equipment and personal protective equipment (PPE) required for the job
  • 1.5 Ensure the adequate quantity of fuel and other consumables have been filled/loaded
  • 1.6 Check work team members comply with site and job competency requirements
  • 1.7 Complete required pre-work paperwork
2 Complete on-site preparation
  • 2.1 Check job scope, location and requirements with job owner/contact person
  • 2.2 Obtain required permits/work authorities
  • 2.3 Lead tool box meeting as required
  • 2.4 Interpret and follow job-related documentation
  • 2.5 Define work area and check exclusion zones
  • 2.6 Ensure waste management, disposal and tracking procedures are in place
  • 2.7 Recognise and control job and site-specific hazards
3 Set up job in accordance with procedures
  • 3.1 Prepare worksite to comply with job and safety requirements
  • 3.2 Inspect, assemble and check vacuum loading equipment to procedures
  • 3.3 Complete pre-start and check emergency stop
  • 3.4 Liaise with other work groups as appropriate to ensure safe and efficient operation
  • 3.5 Establish appropriate means of communication between operators and ensure correct positioning of personnel
  • 3.6 Ensure hazard controls are operational and adequate
  • 3.7 Check and use required personal protective equipment
4 Undertake vacuum loading job in accordance with procedures
  • 4.1 Start up vacuum loading system
  • 4.2 Communicate with/supervise other operator as required by job
  • 4.3 Operate equipment to meet job requirements
  • 4.4 Monitor hazards and activate emergency stop, as required
  • 4.5 Monitor the job, conditions and equipment
  • 4.6 Recognise and diagnose problems
  • 4.7 Take appropriate action to respond to problems
  • 4.8 Complete required paperwork
5 Complete job in accordance with procedures
  • 5.1 Shut down equipment
  • 5.2 Ensure the appropriate disposal of all waste
  • 5.3 Advise job owner/contact person of job completion and any relevant observations during the job
  • 5.4 Clean job site and equipment
  • 5.5 Service and inspect equipment
  • 5.6 Store equipment
  • 5.7 Ensure vehicle is fit for transit (seal truck hose)
  • 5.8 Return to base, including refuelling vehicle en route
  • 5.9 Report any issues or incidents, as required
  • 5.10 Debrief relevant stakeholders
  • 5.11 Complete required paperwork
No information
No information
Replaced By
State Code National Code Title Type
ODO28 MSMWJ306 Operate a vacuum loading system Unit of competency
State Code National Code Title Type
AD322 MSMSS00006 Operate a vacuum loading system Skill set