Unit of competency Outline

Date retreived
23/07/2026 7:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Working on energised low voltage underground electrical apparatus

Working on energised low voltage underground electrical apparatus

Unit of competency
National Code
UETDRMP013
State Code
OEE99
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/10/2022
View on TGA
State Implementation and Classification
Approved Date
17/02/2023
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
17/02/2023
Nominal Hours
20
Description
This unit includes the skills and knowledge required to perform underground energised low voltage (LV) work in electricity supply industry (ESI) environment. This does not include the connection of underground services.It includes energised LV underground mains work techniques and the use of specialised equipment in accordance with workplace requirements.Note: Those holding an existing Certificate III ESI - Distribution Underground qualification or equivalent, or relevant underground/cable jointing licence for energised work meet the prerequisite unit requirements.Refer to the UET Transmission, Distribution and Rail Sector Training Package Companion Volume Implementation Guide for equivalency definition.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to work on energised LV underground electrical apparatus
  • 1.1 Workplace requirements for working on energised electrical apparatus are identified and confirmed
  • 1.2 Hazards are identified, risks assessed, and control measures identified and applied
  • 1.3 Tools, equipment, and personal protective equipment (PPE) required for energised LV work are determined, obtained and confirmed in working order
  • 1.4 Safety observer is appointed in accordance with workplace requirements
2 Carry out work on energised LV underground electrical apparatus
  • 2.1 Hazard control measures are monitored in accordance with workplace requirements
  • 2.2 Use of tools, equipment and PPE for energised LV work are carried out in accordance with workplace requirements
  • 2.3 Energised LV work is carried out in accordance with workplace requirements
3 Complete the work on energised LV underground electrical apparatus
  • 3.1 Completed work is checked for compliance against workplace requirements
No information
No information
No information
State Code National Code Title Type
BHB7 UET30621 Certificate III in ESI - Distribution Overhead Qualification