Unit of competency Outline

Date retreived
22/07/2026 7:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce angled and curved components using solid timber

Produce angled and curved components using solid timber

Unit of competency
National Code
MSFFM3027
State Code
OEJ56
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
64
Description
This unit describes the skills and knowledge required to produce and assemble solid timber components using angled and curved construction methods. Products may be custom-made or mass-manufactured and could include curved counters, desks, seating, cabinetry and end panels. Workers with this competency follow established procedures using discretion, judgement and problem solving to determine construction methods based on design documentation provided to them.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Prepare for task
  • 1.1 Determine task requirements from design and other work documentation
  • 1.2 Plan construction and assembly sequence and identify procedures for checking quality at each stage
  • 1.3 Identify and follow work health and safety procedures
  • 1.4 Select suitable work area for task
  • 1.5 Complete preparatory drawings and set-outs in accordance with work documentation
  • 1.6 Develop cutting list for components in accordance with work documentation
  • 1.7 Select tools and equipment and check they are safe and functional
  • 1.8 Check that materials meet task quality requirements
2 Complete construction
  • 2.1 Set out and prepare materials and mark components in accordance with design requirements
  • 2.2 Use tools and equipment safely and in accordance with manufacturer specifications
  • 2.3 Check product quality against specifications at each stage of construction and assembly.
  • 2.4 Bend and form materials
  • 2.5 Make components and confirm against set-out for tolerances, fit and accuracy
  • 2.6 Assemble components and confirm against set-out for accuracy, fit, twist and distortion
  • 2.7 Prepare product for final finish in accordance with task requirements
3 Finalise task
  • 3.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 3.2 Clean machinery, complete routine maintenance and leave in safe mode in accordance with workplace procedures
  • 3.3 Identify, tag and report faulty equipment in accordance with workplace procedures
  • 3.4 Complete task documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI425 MSFFM3004 Produce angled and curved furniture using solid timber Unit of competency
State Code National Code Title Type
BIK0 MSF30322 Certificate III in Cabinet Making and Timber Technology Qualification