Unit of competency Outline
Date retreived
23/07/2026 10:20 AM AWST
23/07/2026 10:20 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use mattress and base sector hand and power tools
Use mattress and base sector hand and power tools
Unit of competency
National Code
LMFMB2001B
LMFMB2001B
State Code
W8698
W8698
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/09/2008
Nominal Hours
56
Description
This unit covers the competency to use hand and power tools in applications relating to the mattress and base sector of the furnishing industry.
Notes
Elements and Performance Criteria
1. Identify hand and power tools
- 1.1. Types of hand and power tools and their functions identified
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Sources of power supply recognised
2. Select hand tools
- 2.1. Hand tools selected are consistent with needs of the job
- 2.2. Selected hand tools are checked for serviceability and safety and any faults reported to supervisor
- 2.3. Equipment is selected to hold or support material for hand tools application where applicable
3. Use hand tools
- 3.1. Material is located and held in position for hand tool application
- 3.2. Hand tools are safely and effectively used according to their intended use
- 3.3. Hand tools are safely located when not in immediate use
4. Select power tools
- 4.1. Power tools are selected consistent with needs of the job in accordance with conventional work practice
- 4.2. Power tools are visually checked for serviceability/safety in accordance with OHS requirements and any faults reported to supervisor
5. Use power tools
- 5.1. Material is located and held in position for power tool application as applicable
- 5.2. Power tools are safely and effectively used in application processes
- 5.3. Power tools are safely located when not in use
6. Clean up work area and tools
- 6.1. Tools are cleaned, maintained and stored
- 6.2. Equipment is cleaned, maintained and stored
- 6.3. Work area is cleared and waste removed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to work tasks
Hand tools for mattress and base making are to include:
scissors
screwdrivers
measuring and marking equipment
staple lifters
pliers
files and rasps
trimming knives
needles
Hand tools for mattress and base making may also include:
hand saws
hammers
allen keys
spring benders
Power tools for mattress and base making are to include:
staple gun
fabric cutter
foam cutter
lightening cutter
panel cutter
clip guns
glue guns
hog ring gun
long tom
sewing machines
Power tools for mattress and base may also include:
nail guns
drill
jig saw
circular saw
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written to the appropriate person
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy and dexterity in the application of tools to work tasks
Hand tools for mattress and base making are to include:
scissors
screwdrivers
measuring and marking equipment
staple lifters
pliers
files and rasps
trimming knives
needles
Hand tools for mattress and base making may also include:
hand saws
hammers
allen keys
spring benders
Power tools for mattress and base making are to include:
staple gun
fabric cutter
foam cutter
lightening cutter
panel cutter
clip guns
glue guns
hog ring gun
long tom
sewing machines
Power tools for mattress and base may also include:
nail guns
drill
jig saw
circular saw
Fault reporting
Reporting of faults in the operation of hand and power tools may be verbal or written to the appropriate person
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate and apply relevant information related to hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Adopt and carry out correct procedures prior to and during use of hand and power tools
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Mattress and base sector hand and power tools, materials used in the manufacturing and installation of furnishing products.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and should be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate and apply relevant information related to hand and power tools
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Adopt and carry out correct procedures prior to and during use of hand and power tools
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Mattress and base sector hand and power tools, materials used in the manufacturing and installation of furnishing products.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and should be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0342 | LMFMB2001A | Use mattress and base sector hand and power tools | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI629 | MSFSF2014 | Use soft furnishing sector hand and power tools | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W035 | LMF30702 | Certificate III in Mattress and Base Making | Qualification |
| W025 | LMF20502 | Certificate II in Mattress and Base Making | Qualification |