Unit of competency Outline

Date retreived
22/07/2026 9:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain energised transmission lines using barehand techniques from a helicopter

Maintain energised transmission lines using barehand techniques from a helicopter

Unit of competency
National Code
UETDRTO010
State Code
ODN74
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/09/2021
View on TGA
State Implementation and Classification
Approved Date
21/12/2021
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
21/12/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to maintain energised transmission lines using barehand techniques from a helicopter in the electricity supply industry (ESI).It includes the calculation of physical loads and the use and maintenance of specialised tools and equipment, live work authorities/permits and disabling the automatic re-closing device.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may also apply under state and territory legislative and regulatory licensing requirement which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to maintain energised transmission lines from a helicopter
  • 1.1 Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are referred to and confirmed
  • 1.2 Work plan is obtained and confirmed in accordance with workplace requirements
  • 1.3 Materials required for work are determined and obtained in accordance with work plan and workplace requirements
  • 1.4 Tools, equipment and personal protective equipment (PPE) required for work are determined, obtained and confirmed in working order
  • 1.5 Hazards are identified, risks assessed and control measures identified and applied
  • 1.6 Safety observer role and responsibilities are discussed and confirmed in accordance with workplace requirements
  • 1.7 Communication method between the workers and safety observer is determined and confirmed in accordance with workplace requirements
  • 1.8 Minimum approach distances for the work to be performed are determined and confirmed in accordance with workplace requirements
  • 1.9 Work is prioritised and sequenced for completion in accordance with work plan and workplace requirements
  • 1.10 Work permits are received and signed in accordance with workplace requirements
  • 1.11 Auto-reclose devices and associated circuits are rendered inoperative in accordance with workplace requirements
  • 1.12 Worksite is prepared in accordance with the work plan and workplace requirements
  • 1.13 Traffic management plan is confirmed as being in place in accordance with workplace requirements
2 Perform maintenance of energised transmission lines from a helicopter
  • 2.1 Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
  • 2.2 Working at heights and the use of tools, equipment and PPE are carried out in accordance with workplace requirements
  • 2.3 Hazard control measures are monitored in accordance with workplace requirements
  • 2.4 Minimum approach distances are maintained when the work is being performed
  • 2.5 Energised overhead electrical transmission apparatus is maintained in accordance with the work plan and workplace requirements
  • 2.6 Incidents or unplanned events are responded to in accordance with workplace requirements
  • 2.7 Quality checks of work are undertaken in accordance with work plan and workplace requirements
3 Complete work and documentation
  • 3.1 Completed work is checked for compliance against the work plan and workplace requirements
  • 3.2 Incidents or unplanned events are reported in accordance with workplace requirements
  • 3.3 Worksite is rehabilitated, cleaned and made safe in accordance with workplace requirements
  • 3.4 Tools and equipment are cleaned, checked and returned to storage in accordance with workplace requirements
  • 3.5 Surplus materials are returned to storage or disposed of in accordance with workplace requirements
  • 3.6 Work permits are signed off in accordance with workplace requirements
  • 3.7 Works records, reports and documentation are completed in accordance with workplace requirements
No information
No information
State Code National Code Title Type
BHB3 UET40421 Certificate IV in ESI - Network Systems Qualification
BHY3 UET40422 Certificate IV in ESI - Network Systems Qualification