Unit of competency Outline

Information current as of
21/10/2026 12:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manufacture vault lids

Manufacture vault lids

Unit of competency
National Code
SIFCBCR011
State Code
WG576
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
21/06/2013
View on TGA
State Implementation and Classification
Approved Date
16/07/2013
Original Release Date
21/06/2013
Nominal Hours
40
Field of Education
030101 - Manufacturing Engineering
Description
This unit describes the performance outcomes and knowledge required to manufacture concrete vault lids using moulds. It applies to cemetery and crematorium staff involved in burial works. It involves working under supervision and according to work health and safety, relevant legislation and workplace policies and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan and prepare vault lid production work.
  • 1.1 Liaise with manager to identify and confirm work requirements.
  • 1.2 Identify, prepare and use personal protective equipment.
  • 1.3 Select and assemble tools and equipment according to work requirements.
  • 1.4 Inspect tools and equipment for serviceability and report faults.
  • 1.5 Identify and assemble required mould parts according to work requirements.
  • 1.6 Check mould parts for cleanliness and leakage.
  • 1.7 Clean dirty mould parts and report damaged moulds to manager as required.
  • 1.8 Establish mould dimensions against specifications or drawings.
  • 1.9 Prepare concrete for use in mould.
2. Complete work tasks.
  • 2.1 Place reinforcement and fittings in mould as required.
  • 2.2 Pour concrete into mould to create vault lid.
  • 2.3 Vibrate and finish lid according to manufacturer guidelines.
  • 2.4 Store lid according to work requirements.
3. Clean work area.
  • 3.1 Disassemble, clean and store mould.
  • 3.2 Clean, maintain and store tools and equipment.
  • 3.3 Clean work site according to workplace requirements.
  • 3.4 Complete lid manufacture documentation.
No information
No information
No information
State Code National Code Title Type
J576 SIF30213 Certificate III in Gravedigging, Grounds and Maintenance Qualification