Unit of competency Outline

Date retreived
22/07/2026 10:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify electronic sub-assemblies

Modify electronic sub-assemblies

Unit of competency
National Code
UEEAS0003
State Code
OBZ37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to modify electronic sub-assemblies.It includes working safely, checking components against job specifications, testing and following quality procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to modify electronic sub-assemblies
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control measures for work preparation are followed
  • 1.3 Scope of rework is determined from documentation or from work supervisor
  • 1.4 Re-work of sub-assemblies is coordinated with others involved in the work to ensure work schedules are met and safety measures are followed
  • 1.5 Sources of materials required for work are in accordance with workplace procedures
  • 1.6 Tools and equipment required for re-work are selected for their effectiveness and checked for correct operation and safety
2 Modify sub-assemblies
  • 2.1 WHS/OHS risk control work measures and procedures are followed
  • 2.2 Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.4 Components are disconnected and reconnected in accordance with relevant industry and technology of connection methods used
  • 2.5 Work is carried out in accordance with quality procedures and workplace/industry standards
  • 2.6 Re-work of sub-assemblies is completed in accordance with timeframes and environment and workplace conditions
3 Check quality of modified sub-assemblies
  • 3.1 WHS/OHS risk control measures for work completion are followed
  • 3.2 Quality of re-work is checked in accordance with workplace/industry standards
  • 3.3 Functional tests on re-worked sub-assemblies are carried out in accordance with workplace procedures
  • 3.4 Actions are taken to rectify defects within the scope of workplace procedures
  • 3.5 Report forms/data sheets on re-work of sub-assemblies are completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC377 UEENEEA104A Modify electronic sub assemblies Unit of competency