Unit of competency Outline

Date retreived
23/07/2026 5:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake preparations for refractory work

Undertake preparations for refractory work

Unit of competency
National Code
CPCCST4003
State Code
OCP28
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
15
Description
This unit of competency specifies the skills and knowledge required to prepare for the commencement of work using refractory bricks and materials. It includes preparing for the construction or repair of various fire resistant structures, including boilers, kilns and industry furnaces.It applies to specialist and advanced tradespeople working in refractory bricklaying using quality materials as specified by engineers.This unit is suitable for people operating with autonomy. A person working at this level would be expected to take responsibility for the preparation of refractory work.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work.
  • 1.1 Read, interpret and apply refractory construction requirements from current plans, specifications, standards and codes.
  • 1.2 Obtain, interpret and follow relevant information from work health and safety (WHS), workplace procedures and environmental documentation.
  • 1.3 Use measurements and apply formulas to calculate material quantities from plans and specifications.
  • 1.4 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.5 Identify potential hazards and determine and implement control measures.
2 Prepare for refractory work.
  • 2.1 Check quantity of delivered materials against the delivery docket and order list.
  • 2.2 Examine materials for conformity with specification, repudiate non-conforming or damaged materials and report to relevant person.
  • 2.3 Select and check serviceability or equipment and tools and set aside and report any faulty or damaged equipment.
  • 2.4 Select, fit and use personal protective equipment.
3 Prepare site for commencement of work.
  • 3.1 Establish position of project for refractory work from plans.
  • 3.2 Load refractory materials in preparation for job commencement ensuring materials are blended from each pallet.
  • 3.3 Mix refractory mortar consistently to design requirements.
  • 3.4 Load mortar onto boards and maintain sufficient volume and flow of materials during construction.
No information
No information
Replaces
State Code National Code Title Type
W9278 CPCCBC4041A Undertake preparations for refractory work Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification
BGE7 CPC32320 Certificate III in Stonemasonry Qualification