Unit of competency Outline

Date retreived
23/07/2026 5:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assess carbon fibre frames for repair

Assess carbon fibre frames for repair

Unit of competency
National Code
AURB428202A
State Code
D7584
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
26/09/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to determine the extent of damage to carbon fibre bicycle frames, carry out simple repairs and facilitate complex repairs. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect bicycle frame
  • 1.1. Gather bicycle history, including riding incidents and accidents, by discussion with customer
  • 1.2. Inspect bicycle frame for faults, wear or damage using visual, aural and tactile inspections and measurements
  • 1.3. Arrange for non-destructive testing, if required, and where available
  • 1.4. Assess repair or replacement options for bicycle frame
  • 1.5. Document and cost repair for customer approval in accordance with workplace procedures
  • 1.6. Obtain customer approval for work to be undertaken
2. Prepare for repair of bicycle frame
  • 2.1. Plan repair sequence, including post-repair testing and checking process
  • 2.2. Prepare list of parts and materials and determine availability
  • 2.3. Identify need for additional persons to assist in repair process and make arrangements
  • 2.4. Select and check tooling and equipment to meet job requirements
  • 2.5. Prepare work area and set up equipment and materials
3. Repair bicycle frame
  • 3.1. Use personal safety equipment and take precautions to protect others in the workplace
  • 3.2. Use and maintain tooling and equipment in accordance with occupational health and safety (OHS) requirements
  • 3.3. Prepare surface for repair avoiding contamination
  • 3.4. Perform repair operations for bicycle frame according to plan
  • 3.5. Seal the repaired area
  • 3.6. Check bicycle frame specifications and test integrity of repair in accordance with workplace procedures
4. Complete work and clean up
  • 4.1. Clean bicycle frame and prepare unit for delivery
  • 4.2. Clean and store portable tooling and equipment in approved designated areas
  • 4.3. Complete workplace records, customer file and warranty information as required by enterprise
No information
No information
Replaced By
State Code National Code Title Type
WF066 AURBTY4003 Assess carbon fibre frames for repair Unit of competency
No information