Unit of competency Outline

Date retreived
23/07/2026 4:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lay up and cut complicated fabrics and lays

Lay up and cut complicated fabrics and lays

Unit of competency
National Code
MSTAT3003
State Code
OEZ50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
030107 - Garment Making
Original Release Date
03/07/2023
Nominal Hours
25
Description
This unit describes the skills and knowledge required to lay up fabric and cut work as part of the textile production process in situations involving complex patterns, multiple layers, step layers and two-way markers. Fabrics may have directional patterns. Work may be completed using manual or computer-aided techniques. This unit applies to individuals working in accordance with pre-determined specifications and established procedures using discretion and judgement to manage tasks involving some complexity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to cut complicated fabrics and lays
  • 1.1 Determine lay-up and cutting requirements from work specifications
  • 1.2 Identify and comply with workplace health and safety requirements
  • 1.3 Prepare equipment and working area in accordance with job requirements
  • 1.4 Obtain fabric and marker and confirm suitability to meet specifications
2. Lay up fabric and position marker
  • 2.1 Lay up fabric, check lay height and position of fabric according to requirements of cutting equipment and work specifications
  • 2.2 Place marker on lay, check marker and lay alignment and take appropriate action according to job specification
3. Cut work
  • 3.1 Safely operate equipment and cut lay to meet specifications
  • 3.2 Inspect cut work, identify any faults and rectify any deficiencies
  • 3.3 Monitor performance of cutting equipment for signs of faulty operation and take required action to rectify performance
4. Complete work
  • 4.1 Complete and store production documentation in accordance with workplace procedures
  • 4.2 Perform routine maintenance on cutting equipment in accordance with manufacturer instructions and workplace procedures
  • 4.3 Clean work area and process unused fabric for recycling or safe disposal to minimise waste
No information
No information
Replaces
State Code National Code Title Type
BAX41 MSTCL3005 Lay up and cut complicated fabrics and lays Unit of competency