Unit of competency Outline

Date retreived
22/07/2026 6:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce compression moulded products

Produce compression moulded products

Unit of competency
National Code
PMBPROD314
State Code
BAI69
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
52
Description
This unit of competency covers the skills and knowledge required to operate and adjust compression moulding equipment to produce product.This unit of competency applies to experienced operators who are required to start up and shut down compression moulding equipment, monitor equipment operation, establish a stable process, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The advanced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan own work requirements
  • 1.1 Identify equipment and processes used for production process and upstream and downstream operations from production plan or request
  • 1.2 Identify and check materials required
  • 1.3 Implement measures to control identified hazards in line with procedures and duty of care
  • 1.4 Identify requirements for materials, quality, production and equipment checks
2 Check compression moulding process set-up to procedures
  • 2.1 Identify process settings required for product
  • 2.2 Set process to required settings
  • 2.3 Check materials are correct
  • 2.4 Take appropriate action for non-conforming materials
  • 2.5 Set up date, batch and materials markings to specifications, as required
  • 2.6 Complete pre-start checks
  • 2.7 Start up press/compression moulding process
3 Operate and make adjustments as required to the compression moulding process
  • 3.1 Operate compression moulding process, noting key variables
  • 3.2 Monitor controls/displays/terminals for production and process data
  • 3.3 Take samples as required and identify product out of specification
  • 3.4 Monitor product/process quality
  • 3.5 Make adjustments to remedy faults and non-conformity as required
  • 3.6 Establish a stable compression moulding process
  • 3.7 Adjust process to minimise scrap and trim
  • 3.8 Clean, adjust and lubricate equipment as required
  • 3.9 Shut down process as required
  • 3.10 Leave machine in appropriate condition and ready for the next start-up
4 Anticipate and solve problems
  • 4.1 Recognise a problem or a potential problem
  • 4.2 Determine problems needing priority action
  • 4.3 Refer problems outside area of responsibility to appropriate person, with possible causes
  • 4.4 Seek information and assistance as required to solve problems
  • 4.5 Solve problems within area of responsibility
  • 4.6 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7627 PMBPROD314C Produce compression moulded products Unit of competency
State Code National Code Title Type
BCT3 PMB30116 Certificate III in Polymer Processing Qualification
BCU0 PMB40116 Certificate IV in Polymer Technology Qualification