Unit of competency Outline
Date retreived
23/07/2026 8:29 AM AWST
23/07/2026 8:29 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out measurements and calculations
Carry out measurements and calculations
Unit of competency
National Code
RIICCM201D
RIICCM201D
State Code
WH077
WH077
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
010101 - Mathematics
Original Release Date
29/05/2014
Nominal Hours
16
Description
This unit describes a participant’s skills and knowledge required to carry out measurements and calculations in Civil Construction. This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for measurements and calculations
- 1.1 Access, interpret and apply measurements and calculations documentation and ensure the work activity is compliant
- 1.2 Obtain, read, interpret, clarify and confirm work requirements
- 1.3 Select, and check for faults, equipment/tools for work activities
2. Perform measurements
- 2.1 Select and apply method of obtaining the measurement
- 2.2 Obtain measurements using appropriate tool, and ensure required accuracy
- 2.3 Confirm and record measurements
3. Perform calculations
- 3.1 Select appropriate calculation method
- 3.2 Calculate values for the project using the appropriate factors
- 3.3 Confirm and record results
4. Estimate quantities
- 4.1 Select appropriate formulas for calculating quantities
- 4.2 Make calculations for determining quantities
- 4.3 Estimate quantities from the calculations taken
- 4.4 Confirm and record quantities for the project within project tolerances
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB066 | RIICCM201A | Carry out measurements and calculations | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBX22 | RIICCM201E | Carry out measurements and calculations | Unit of competency |