Unit of competency Outline
Date retreived
23/07/2026 5:57 AM AWST
23/07/2026 5:57 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce and maintain cutting tools
Produce and maintain cutting tools
Unit of competency
National Code
LMFFM3032B
LMFFM3032B
State Code
W8632
W8632
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030705 - Toolmaking
Original Release Date
19/09/2008
Nominal Hours
36
Description
This unit covers the competency to select and machine materials, to produce and maintain profile knives, and to maintain router cutters, straight knives and profile cutter heads used in woodworking machinery
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including development, quality, materials, equipment, and quantities
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.3. Material for machining is selected and inspected for quality
- 1.4. Machines, grinding tools and accessories are identified and checked for safe and effective operation
- 1.5. Procedures are determined for minimising waste material
- 1.6. Procedures are identified for maximising energy efficiency while completing the job
2. Set up machines
- 2.1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
- 2.2. Grinding operations are checked for accuracy and quality of finished work
- 2.3. Necessary adjustments are made to machine settings
3. Operate machines
- 3.1. Machine start-up procedure is carried out in accordance with manufacturers' instructions
- 3.2. Tooling is machined in accordance with manufacturers' instructions, safe handling procedures and standard workplace operating procedures
- 3.3. Machine is operated in accordance with its designed capacity and purpose, and to manufacturers' recommendations
- 3.4. Machine operation is monitored to ensure product quality and output
- 3.5. Waste quantities are checked and minimised
- 3.6. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
- 3.7. Problems with the required work and/or the operation of the machine are identified and reported to appropriate persons
- 3.8. Daily routine lubrication and adjustments to the machines are made
4. Clean up work area and maintain equipment
- 4.1. Material that can be reused is collected and stored
- 4.2. Waste and scrap are removed following workplace procedures
- 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
- 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace
- 4.5. Operator maintenance is completed in accordance with manufacturers' specifications and site procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Machines are to include:
either a tool and cutter grinder or a profile grinder and also may include: a straight knife grinder and a bench or pedestal grinder
Unit scope
The work involves the identification of cutter design requirements, the geometrical development of cutter profiles, the inspection and identification of maintenance requirements, the selection and matching of abrasives for job requirements, the production of templates, the production and maintenance of detailed cutter profiles and the maintenance of straight cutters for a range of woodworking machines
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the set up and operation of machines
Materials are to include:
high speed steel ands tungsten carbide
and may include other combination materials
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Machines are to include:
either a tool and cutter grinder or a profile grinder and also may include: a straight knife grinder and a bench or pedestal grinder
Unit scope
The work involves the identification of cutter design requirements, the geometrical development of cutter profiles, the inspection and identification of maintenance requirements, the selection and matching of abrasives for job requirements, the production of templates, the production and maintenance of detailed cutter profiles and the maintenance of straight cutters for a range of woodworking machines
Unit context
OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the set up and operation of machines
Materials are to include:
high speed steel ands tungsten carbide
and may include other combination materials
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Read and interpret cutting lists and job specifications to prepare for work
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete the following:
develop and produce a set of two matching profile cutters, and
produce a set of profile cutters from a template the candidate has manufactured, or
maintain a router cutter and solid profile cutter head
Conduct operator maintenance on the machines/ equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to grinding machinery as identified in the Range Statement, standard operating procedures, and unprocessed materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Read and interpret cutting lists and job specifications to prepare for work
Identify materials used in the work process
Follow work instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete the following:
develop and produce a set of two matching profile cutters, and
produce a set of profile cutters from a template the candidate has manufactured, or
maintain a router cutter and solid profile cutter head
Conduct operator maintenance on the machines/ equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource Implications
Access to grinding machinery as identified in the Range Statement, standard operating procedures, and unprocessed materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0306 | LMFFM3032A | Produce and maintain cutting tools | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI444 | MSFFM3023 | Produce and maintain cutting tools | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W031 | LMF30302 | Certificate III in Furniture Making | Qualification |
| W032 | LMF30402 | Certificate III in Furniture Making (Cabinet Making) | Qualification |
| W033 | LMF30502 | Certificate III in Furniture Making (Wood Machining) | Qualification |