Unit of competency Outline

Date retreived
22/07/2026 2:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and apply wallpaper

Remove and apply wallpaper

Unit of competency
National Code
CPCCPD3027
State Code
OCO37
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
80
Description
This unit of competency specifies the skills and knowledge required to apply wallpaper to walls of different materials to form a protective and decorative finish. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions for details of requirements to apply wallpaper.
  • 1.2 Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Prepare plan for hanging wallpaper.
  • 1.4 Select and fit personal protective equipment (PPE) as required for each task.
  • 1.5 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Identify the types and quantities of materials required for the task and safely prepare and position ready for use.
  • 1.7 Check wallpaper for conformity to pattern number, batch number and other shading requirements.
  • 1.8 Select tools and equipment, check for serviceability and report any faults.
2 Remove wallpaper and prepare surface.
  • 2.1 Determine type, condition and nature of existing wallpaper.
  • 2.2 Select surface preparation method in accordance with environmental, finish and substrate requirements.
  • 2.3 Remove wallpaper using appropriate tools.
  • 2.4 Prepare surfaces by removing loose debris.
  • 2.5 Repair surface defects and imperfections, and stop, fill and sand to smooth finish.
  • 2.6 Conduct adhesion test and take any required remedial action.
3 Prepare to apply wallpaper.
  • 3.1 Seal wall using appropriate material.
  • 3.2 Prepare adhesives in accordance with safe workplace procedures.
  • 3.3 Apply size coating to work area and allow to dry.
4 Apply wallpaper/lining paper to walls and ceilings.
  • 4.1 Apply wallpaper/ lining paper ensuring an even surface, seams are butted, paper is plumb and pattern matches.
  • 4.2 Trim accurately around fittings.
  • 4.3 Remove residue for a clean finish.
5 Clean up.
  • 5.1 Clean-up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.
  • 5.2 Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.
  • 5.3 Check and maintain tools and equipment and clean with appropriate solvents.
  • 5.4 Dispose of waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.
  • 5.5 Store tools, equipment and unused materials in accordance with workplace practices.
No information
No information
Replaces
State Code National Code Title Type
D7391 CPCCPD3027A Apply wallpaper Unit of competency
State Code National Code Title Type
BGE5 CPC30620 Certificate III in Painting and Decorating Qualification