Unit of competency Outline

Date retreived
22/07/2026 11:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Load and prove operating program for CNC machine

Load and prove operating program for CNC machine

Unit of competency
National Code
FWPCOT3289
State Code
OBM40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2020
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge required to load and prove a program for a computer numerical control (CNC) machine. This includes preparing for work, locating the CNC program file, checking the program for currency, loading the program correctly into the machine controller, checking for and dealing with fault/error messages, following proving/editing procedures and saving edited programs.The unit applies to individuals who load and prove programs for CNC machines in a timber processing and manufacturing facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to load and verify program for CNC machinery
  • 1.1 Review work order and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with loading and proving CNC programs
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Use the correct control program and ensure it is correctly loaded into machine controller
  • 1.6 Call up the program and deal with any error messages or faults according to workplace procedures and manufacturer instructions
  • 1.7 Confirm program integrity according to workplace procedures
2. Load program
  • 2.1 Carry out program loading and checking activities according to workplace procedures and manufacturer instructions
  • 2.2 Store program media away from contaminants or electromagnetic sources according to workplace procedures
  • 2.3 Return operating programs to correct location on completion of machining activities
3. Prove program for CNC machinery
  • 3.1 Confirm that machine and program operate safely and correctly by applying appropriate checks and procedures according to machine type and manufacturer instructions
  • 3.2 Adjust machine and program operating parameters to optimise outcomes to be achieved
  • 3.3 Load and correctly set up all associated equipment
  • 3.4 Check that all safety mechanisms are in place and that the machine is set correctly for the required operations
  • 3.5 Respond to problems within scope of responsibility, or report problem to appropriate personnel
  • 3.6 Save and store edited programs according to workplace procedures
No information
No information
No information