Unit of competency Outline

Date retreived
23/07/2026 10:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dive using closed-circuit breathing apparatus (O2) in open water to a maximum depth of 10 metres

Dive using closed-circuit breathing apparatus (O2) in open water to a maximum depth of 10 metres

Unit of competency
National Code
DEFWDV006
State Code
BBB81
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
17/08/2017
View on TGA
State Implementation and Classification
Approved Date
21/02/2018
Field of Education
031799 - Maritime Engineering And Technology, N.e.c.
Original Release Date
21/02/2018
Nominal Hours
0
Description
This unit specifies the skills and knowledge required to dive using closed-circuit breathing apparatus (CCBA) (O2) in an open water environment to a maximum depth of 10 metres.It includes operating the oxygen compressor/handbooster pump, inspecting and operating CCBA (O2) equipment, and conducting CCBA (O2) specific contingency drills.This unit applies to persons working as Defence divers, but can apply to others working as work divers.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Persons undertaking this unit work independently and perform specific tasks in a range of contexts that could be unpredictable.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Operate an O2 compressor/hand-booster pump
  • 1.1 Inspect compressor and associated equipment for serviceability
  • 1.2 Fit appropriate protective equipment in accordance with organisational procedures
  • 1.3 Connect leads and hoses to compressor
  • 1.4 Charge gas cylinders to maximum working pressure and record details in relevant logs in accordance with organisational procedures
  • 1.5 Conduct operator level maintenance on compressor in accordance with operational procedures
  • 1.6 Undertake de-service the compressor after use, in accordance with operational procedures
2 Conduct dive operations
  • 2.1 Select, inspect and fit CCBA (O2), and conduct apparatus test prior to entering water and in water, in accordance with dive plan
  • 2.2 Use CCBA (O2) during dive operations and demonstrate relevant dive contingencies in accordance with organisational procedures and dive plan
  • 2.3 Undertake activities to de-service CCBA (O2) and report defects, as required
No information
No information
No information