Unit of competency Outline

Date retreived
22/07/2026 8:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Document simple geological information for a site

Document simple geological information for a site

Unit of competency
National Code
MSS024032
State Code
OER03
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/05/2023
Field of Education
010703 - Geology
Original Release Date
03/05/2023
Nominal Hours
35
Description
This unit describes the skills and knowledge required to recognise, interpret and document geological landforms and related geological and ecosystem interactions of a site. This unit applies to environmental technicians and similar roles who are required to recognise common geological landforms and relate these to basic geological processes and other ecosystem components of a site, obtain and classify near surface samples of common rocks, minerals and soils and identify factors that can affect site revegetation or rehabilitation. This unit applies in a range of industry sectors including but not limited to environmental services; environmental compliance, auditing and inspection; groundwater and clean water management; solid and hazardous waste management; management of contaminated sites; site remediation or rehabilitation; geotechnical services and civil engineering; and natural resource management.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for field work
  • 1.1 Review job request to identify the equipment involved, samples to be collected and test methods
  • 1.2 Identify hazards associated with the site, test methods and equipment used and read safe work procedures to determine action to be taken
  • 1.3 Confirm site location, access, timing and any client requirements
  • 1.4 Assemble all required equipment and materials and check that they are fit for purpose
  • 1.5 Stow equipment and materials to ensure their safe transport
  • 1.6 Arrange transport to site
  • 1.7 Liaise with relevant personnel on arrival at site to ensure safety and minimise disruption to others
  • 1.8 Seek input from colleagues and/or manager/s to confirm understanding of work requirements
2. Recognise geological structures and processes
  • 2.1 Recognise common landforms and related geological processes
  • 2.2 Read and interpret simple geological maps, diagrams and aerial photos to identify topography and geological structures
  • 2.3 Apply principles of geological processes and the geological timescale to explain the formation and occurrence of common rocks, minerals, soils and aquifers
3. Identify common rocks and minerals
  • 3.1 Sort handheld specimens of common sedimentary, igneous and metamorphic rocks by observing their textural, structural and mineralogical properties
  • 3.2 Identify handheld specimens of common rocks and minerals by comparing their physical properties with classification charts and tables
4. Identify common soil types and their properties
  • 4.1 Obtain soil samples using specified sampling equipment and methods
  • 4.2 Examine soil colour, texture and properties of soil components to classify common soils
  • 4.3 Identify and describe simple soil profiles at field sites
  • 4.4 Recognise influences of rock type, drainage, age and climate on development of soil profiles
  • 4.5 Recognise common forms of soil degradation
5. Relate local geology to flora and fauna and land use
  • 5.1 Interpret and describe sites in terms of basic relationships between parent material, climate, topography, soils and living ecosystem components
  • 5.2 Recognise how local geology and relationships can influence the revegetation and rehabilitation of sites
6. Maintain a safe work environment
  • 6.1 Use safe work procedures and protective equipment to ensure personal safety and that of others
  • 6.2 Minimise environmental impacts of sampling and/or testing and generation of waste
  • 6.3 Collect and/or dispose of all waste in accordance with environmental and quarantine requirements and workplace procedures
7. Report data and finalise documentation
  • 7.1 Report field data in the required formats and expected time frame
  • 7.2 Complete all required documentation
  • 7.3 Maintain the security and confidentiality of data and documentation in accordance with workplace requirements
No information
No information
Replaces
State Code National Code Title Type
OAF14 MSS024020 Recognise common geological landforms and samples Unit of competency