Unit of competency Outline

Date retreived
23/07/2026 4:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Take routine site measurements

Take routine site measurements

Unit of competency
National Code
MSL972002
State Code
OEY00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
019909 - Laboratory Technology
Original Release Date
24/05/2023
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge to take direct measurements on site using workplace procedures. Measurements will be straightforward and involve a minimal number of steps, take a short time, have easily recognised control limits and use equipment calibrated by others. Measurements include the use of instruments and/or kits.This unit of competency is applicable to production operators, field assistants and laboratory assistants in manufacturing, construction materials and environmental services industry sectors.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Prepare for measurements
  • 1.1 Confirm the purpose, priority and nature of measurements from work documentation
  • 1.2 Liaise with relevant personnel to arrange location access and all necessary clearances or permits
  • 1.3 Identify location hazards and review workplace safety procedures
  • 1.4 Assemble measuring and safety equipment and check they are fit for purpose
  • 1.5 Check all items against inventory and stow them to ensure safe transport
  • 1.6 Arrange any required transport for location access
2. Take measurements
  • 2.1 Locate and access measurement points in accordance with security and workplace procedures
  • 2.2 Seek advice if the required measurements cannot be made or if procedures require modification
  • 2.3 Operate measuring equipment in accordance with workplace procedures and manufacturer instructions
  • 2.4 Take sufficient readings to ensure reliable data
  • 2.5 Record data with required legibility, accuracy, precision and units
  • 2.6 Record environmental conditions and any other observations that may impact on data quality
  • 2.7 Recognise obvious errors and atypical data and take appropriate corrective action
  • 2.8 Follow procedures for location security when sampling is completed
3. Finalise measurement process
  • 3.1 Follow workplace procedures for any required cleaning and decontamination of equipment and vehicle
  • 3.2 Check all equipment and materials against inventory and stow for safe transport
  • 3.3 Liaise with relevant personnel to restore normal production and/or services as necessary
  • 3.4 Report all measurements in accordance with workplace procedures
  • 3.5 Check and document serviceability of equipment before storage
4. Maintain a safe work environment
  • 4.1 Use established work practices and personal protective equipment (PPE) to ensure personal safety and that of others
  • 4.2 Minimise environmental impacts of measurements and generation of waste
  • 4.3 Dispose of waste in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWO24 MSL972001 Conduct routine site measurements Unit of competency
State Code National Code Title Type
BIX7 MSL30122 Certificate III in Laboratory Skills Qualification
BIX8 MSL20122 Certificate II in Sampling and Measurement Qualification