Unit of competency Outline

Date retreived
22/07/2026 7:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair ignition systems

Repair ignition systems

Unit of competency
National Code
AURE320666B
State Code
D7591
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
10/07/2012
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
10/07/2012
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to repair Kettering and electronic ignition systems (not including systems associated with electronic engine management) and magnetos and associated components for light vehicles, plant, motorcycles, marine and outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Determine job requirements, including method, processes and equipment
  • 1.2. Read and interpret job specifications
  • 1.3. Access and interpret correct information from manufacturer/component supplier specifications
  • 1.4. Identify equipment and tooling and check for safe and effective operation
  • 1.5. Determine procedures to minimise task time
2. Test ignition systems and components and identify faults
  • 2.1. Observe occupational health and safety (OHS) requirements, including personal safety needs, throughout the work
  • 2.2. Carry out tests to determine faults using appropriate tooling and techniques
  • 2.3. Complete tests without causing damage to component or system
  • 2.4. Identify faults and determine preferred repair action
  • 2.5. Complete tests according to industry regulations/ guidelines, OHS, legislation and enterprise procedures and policies
3. Repair ignition systems and components
  • 3.1. Carry out repairs, component replacement and adjustments to manufacturer/component supplier specifications
  • 3.2. Select and use appropriate tooling, techniques and materials
  • 3.3. Repair ignition systems without causing damage to component or system
  • 3.4. Perform retests to ensure correct and safe ignition system operation, according to industry regulations/guidelines, OHS, legislation and enterprise procedures and policies
  • 3.5. Complete workplace and equipment documents in accordance with site requirements
4. Clean up work area and maintain equipment
  • 4.1. Collect and store material that can be reused
  • 4.2. Remove waste and scrap following workplace procedures
  • 4.3. Clean equipment and work area and inspect for serviceable condition in accordance with workplace procedures
  • 4.4. Tag unserviceable equipment and identify faults in accordance with workplace requirements
  • 4.5. Complete operator maintenance in accordance with manufacturer/component supplier specifications and site procedures
  • 4.6. Maintain and store tooling and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2873 AURE320666A Repair ignition systems Unit of competency
Replaced By
State Code National Code Title Type
WF113 AURETR3031 Diagnose and repair ignition systems Unit of competency