Unit of competency Outline
Date retreived
22/07/2026 7:55 PM AWST
22/07/2026 7:55 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Match direct gloss solid paint colour on vehicles or components
Match direct gloss solid paint colour on vehicles or components
Unit of competency
National Code
AURVTP015
AURVTP015
State Code
AWZ40
AWZ40
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to match vehicle or component direct gloss solid paint colours using original equipment manufacturer (OEM) paint codes. It involves preparing for the task, selecting and using specialist tools and equipment, identifying paint codes, preparing colour matching test cards, mixing and spraying paint and conducting a visual colour match, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to match solid paint colour
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Colour matching information is accessed and interpreted
- 1.3 Vehicle paint specifications are identified from workplace instructions and recorded
- 1.4 Paint colour matching materials are selected and inspected for quality
- 1.5 Hazards associated with the work are identified and risks are managed
- 1.6 Paint tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
- 1.7 Work is planned to identify solid colour matching techniques, minimise waste, and prevent damage to vehicle
2. Mix direct gloss solid paint colours
- 2.1 Paint mixing system is set up and operated according to manufacturer instruction
- 2.2 Mixing is carried out according to paint manufacturer specifications, approved colour matching method, and safety and environmental requirements, and without causing damage to vehicle or components
3. Prepare colour test card and perform visual matching
- 3.1 Colour matching test cards are prepared and sprayed to enable a visual comparison between matched and original paint
- 3.2 Visual matching is carried out, comparisons are made between matched and original paint, and paint codes are recorded according to workplace procedures, OEM paint codes, and safety and environmental requirements
- 3.3 Paint is remixed for further matching prior to application if first mix does not match original paint
4. Complete work processes
- 4.1 Final inspection is made to ensure work meets workplace expectations and matched paint is presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF536 | AURVTP3015 | Apply solid colour matching techniques | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCI83 | AURVTP115 | Match direct gloss solid paint colour on vehicles or components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAB9 | AUR32416 | Certificate III in Automotive Refinishing Technology | Qualification |