Unit of competency Outline

Date retreived
22/07/2026 8:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Mould composites products using hand lay-up techniques

Mould composites products using hand lay-up techniques

Unit of competency
National Code
PMBPROD347E
State Code
ODB45
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to apply polymer-matrix lay-up moulding techniques for the production of advanced composites products.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the materials science application of wet lay-up technology at the trade level of competency.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
  • 1.1 Identify equipment and materials, including additives, from job specifications
  • 1.2 Identify equipment and processes required for upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify checks and testing processes required for equipment, materials, quality and production management to meet job requirements
  • 1.5 Identify waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Verify materials, resins and fibres are correct and prepared according to job specifications
  • 2.2 Inspect and prepare mould in readiness for use
  • 2.3 Prepare jigs, fixtures and tools according to job specifications
  • 2.4 Set up date, batch and materials markings according to workplace procedures
  • 2.5 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Mould composites products
  • 3.1 Apply materials to mould, and make adjustments to settings to meet job specifications
  • 3.2 Follow checking and testing processes to assess if output meets job specifications and quality standards, and apply strategies for managing nonconforming outputs
  • 3.3 Accurately complete logs and records
  • 3.4 Work efficiently to minimise scrap and trim according to workplace procedures
4. Anticipate and solve process control variances
  • 4.1 Recognise existing or potential process control variances and their causes
  • 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 4.3 Monitor process control variances and corrective actions taken until resolved
  • 4.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI44 PMBPROD347 Produce composites using hand lamination Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification
BGO8 PMB40121 Certificate IV in Polymer Technology Qualification