Unit of competency Outline
Date retreived
23/07/2026 12:00 AM AWST
23/07/2026 12:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out off-site repair, overhaul and assembly of mechanical signalling equipment
Carry out off-site repair, overhaul and assembly of mechanical signalling equipment
Unit of competency
National Code
TLIB3048A
TLIB3048A
State Code
D4989
D4989
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/11/2014
Field of Education
030701 - Mechanical Engineering
Original Release Date
04/11/2014
Nominal Hours
40
Description
This unit involves the skills and knowledge required to carry out off-site repair, overhaul and assembly of mechanical signalling equipment in accordance with safeworking and regulatory requirements and workplace procedures. It includes assessing equipment condition, replacing out-of-specification components, producing components where required, assembling components, and testing and adjusting equipment to ensure overall system integrity. Licensing or certification requirements are not applicable to this unit.
Notes
Elements and Performance Criteria
1Assess equipment condition
- 1.1 Equipment condition is established through tagged repair sheets from the field and initial examination
- 1.2 Condition of all out-of-tolerance equipment and components is correctly identified and recorded through detailed inspection and testing
- 1.3 The type and extent of required repairs are evaluated to determine viability of repair operations and to estimate time requirements
- 1.4 Components requiring disposal are identified and replacement components are arranged to allow work to commence
2Replace components
- 2.1 Equipment is dismantled to the extent required to carry out previously identified repairs
- 2.2 Components requiring replacement are stored for later repair/disposed of in line with organisational requirements
- 2.3 Components are replaced/repaired/returned to operational condition in line with technical specifications and standard workshop practices
3Produce components
- 3.1 Components are produced to comply with the defined job requirements and technical specifications
- 3.2 Appropriate manufacturing/workshop techniques are applied to ensure required quality components are produced
4Assemble components
- 4.1 Assembly methods and sequencing are planned to ensure efficient operations
- 4.2 Components are laid out for assembly in compliance with planned processes
- 4.3 Assembly of all components, sub assemblies and equipment is correctly carried out as per planned operations and in compliance with job and technical specifications
- 4.4 All securing methods and operations comply with the job and technical specifications
5Test and adjust equipment
- 5.1 All equipment functions are tested to ensure conformance to drawings and specifications
- 5.2 All assembly and joining/securing processes and outcomes are checked and tested as required to match the job and technical specifications
- 5.3 Adjustments are made to ensure all equipment operations meet the technical specifications
- 5.4 Operational/functional compliance to the job and technical specifications is confirmed and certified
- 5.5 All required documentation is correctly completed and forwarded to appropriate personnel to confirm the equipment is certified for use
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
in all weather conditions
Work may be conducted in:
restricted spaces or exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals
dangerous or hazardous substances
movements of equipment, materials and vehicles
Signal equipment may include:
point machines
hydraulic and pneumatic points
signals
points
equipment
ground frames
channel irons
wire ropes
point rodding
level crossing signs
signal locations/housings
foundations/supports/sleepers
Cleaning and servicing equipment may include:
steam cleaners
hand tools
brushes/wire and paint
hand-held power/air tools
brush/weed trimmers
Chemicals and consumables may include:
paints and paint strippers
cleaning and de-greasing agents
solvents
weed killers
oils
greases
cleaning rags
Rubbish removal/disposal may be carried out:
using internal and/or external operating rules and procedures
Visual checks may include:
rust
breakage
graffiti
rubbish build up
environmental damage/degradation
Operational checks may include:
mechanical movement
linkages
clearances
interferences
alignment
wear
loose fittings
Communication equipment may include:
two-way radios
computers
telephones/mobile phones
Safety and protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios
hand lamps
flags
safety devices
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Information/documents may include:
operational instructions, policies and workplace procedures
authority to access the site or to operate equipment, including:
written authority
verbal authority
authority as detailed in organisation operating rules and procedures
notices, records and requests
technical instructions
manufacturers or workplace equipment operation manuals and specifications
emergency procedure manuals
two-way radio operation procedures
QA plans, data and document control
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
in all weather conditions
Work may be conducted in:
restricted spaces or exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals
dangerous or hazardous substances
movements of equipment, materials and vehicles
Signal equipment may include:
point machines
hydraulic and pneumatic points
signals
points
equipment
ground frames
channel irons
wire ropes
point rodding
level crossing signs
signal locations/housings
foundations/supports/sleepers
Cleaning and servicing equipment may include:
steam cleaners
hand tools
brushes/wire and paint
hand-held power/air tools
brush/weed trimmers
Chemicals and consumables may include:
paints and paint strippers
cleaning and de-greasing agents
solvents
weed killers
oils
greases
cleaning rags
Rubbish removal/disposal may be carried out:
using internal and/or external operating rules and procedures
Visual checks may include:
rust
breakage
graffiti
rubbish build up
environmental damage/degradation
Operational checks may include:
mechanical movement
linkages
clearances
interferences
alignment
wear
loose fittings
Communication equipment may include:
two-way radios
computers
telephones/mobile phones
Safety and protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios
hand lamps
flags
safety devices
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Information/documents may include:
operational instructions, policies and workplace procedures
authority to access the site or to operate equipment, including:
written authority
verbal authority
authority as detailed in organisation operating rules and procedures
notices, records and requests
technical instructions
manufacturers or workplace equipment operation manuals and specifications
emergency procedure manuals
two-way radio operation procedures
QA plans, data and document control
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
correctly identifying faults
carrying out appropriate repairs in accordance with workplace requirements
correctly testing equipment following repairs
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Assessment must include exercises which demonstrate competent performance of the following in a range of situations:
correctly identifying faults
carrying out appropriate repairs in accordance with workplace requirements
correctly testing equipment following repairs
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVK52 | TLIB3048 | Carry out off-site repair, overhaul and assembly of mechanical signalling equipment | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J536 | TLI31913 | Certificate III in Mechanical Rail Signalling | Qualification |