Unit of competency Outline
Date retreived
22/07/2026 6:43 PM AWST
22/07/2026 6:43 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Monitor, operate and control granular media filtration processes
Monitor, operate and control granular media filtration processes
Unit of competency
National Code
NWP354B
NWP354B
State Code
D1930
D1930
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
14/01/2009
Field of Education
030717 - Plant And Machine Operations
Original Release Date
14/01/2009
Nominal Hours
30
Description
This unit of competency describes the outcomes required to monitor, operate and control granular media filtration plant; and to measure and report on system performance and process quality control. The ability to identify faults, determine and apply technical adjustments, conduct chemical dosing procedures and produce technical reports are essential to performance.
Notes
Elements and Performance Criteria
1Monitor filtration plant performance.
- 1.1 Monitor test results and processes to meet organisational and statutory requirements.
- 1.2 Identify and report process faults and the operational condition of plant according to organisational procedures.
2Operate and control filtration processes.
- 2.1 Carry out routine plant inspections according to organisational and plant requirements.
- 2.2 Collect process samples and conduct standard tests.
- 2.3 Perform process calculations associated with granular media filtration.
- 2.4 Carry out basic system adjustments to enhance system performance according to organisational procedures.
- 2.5 Collect and report process data according to organisational and plant requirements.
3Compile filtration process reports.
- 3.1 Compile reports from plant and system data to meet organisational procedures and statutory requirements.
- 3.2 Report observations outside defined parameters for further action.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Processes may include:
slow granular media filters
conventional granular media filters
pressure and gravity granular media filters
backwash procedures
air assist backwash
chemical addition of filter aid polymers
Organisational and statutory requirements may include:
by-laws and organisational policies
standard operating procedures
Australian and New Zealand Environment and Conservation Council (ANZECC) guidelines
environment protection
occupational health and safety
chemicals
dangerous goods
lifts and cranes
World Health Organisation standards
Australian Drinking Water Guidelines
National Water Quality Management strategy
Environment Protection Authority regulations
licensing agreements
electrical standards
Routine plant inspections may include:
use of equipment, including:
electronic monitoring and metering systems
chart recording systems
basic hand tools
sampling and laboratory testing equipment
computerised equipment
communication equipment
personal protective equipment
interaction and communication with other employees, other authorities and the general public
visual observation
identification of corrosion damage
implementation of reporting procedures that may also include procedures for the implementation of by-laws, organisational policies and statutory requirements
Tests may include:
pH
turbidity
colour
particle counting
headloss
System adjustments may include:
pH correction
filtration rate
backwash rate
filtration aid addition
Reports may include:
chemical usage
plant performance data
Processes may include:
slow granular media filters
conventional granular media filters
pressure and gravity granular media filters
backwash procedures
air assist backwash
chemical addition of filter aid polymers
Organisational and statutory requirements may include:
by-laws and organisational policies
standard operating procedures
Australian and New Zealand Environment and Conservation Council (ANZECC) guidelines
environment protection
occupational health and safety
chemicals
dangerous goods
lifts and cranes
World Health Organisation standards
Australian Drinking Water Guidelines
National Water Quality Management strategy
Environment Protection Authority regulations
licensing agreements
electrical standards
Routine plant inspections may include:
use of equipment, including:
electronic monitoring and metering systems
chart recording systems
basic hand tools
sampling and laboratory testing equipment
computerised equipment
communication equipment
personal protective equipment
interaction and communication with other employees, other authorities and the general public
visual observation
identification of corrosion damage
implementation of reporting procedures that may also include procedures for the implementation of by-laws, organisational policies and statutory requirements
Tests may include:
pH
turbidity
colour
particle counting
headloss
System adjustments may include:
pH correction
filtration rate
backwash rate
filtration aid addition
Reports may include:
chemical usage
plant performance data
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The candidate should demonstrate the ability to monitor, operate and control granular media filtration processes, including:
monitoring test results and processes
identifying and reporting faults
conducting routine plant inspections
taking samples and performing basic tests
making basic process adjustments according to instructions
collecting data and completing required documentation
Context of and specific resources for assessment
Access to the workplace and resources including:
documentation that should normally be available in a water industry organisation
relevant codes, standards, and government regulations
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the language and literacy capacity of the candidate and the work being performed.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice
a decision of competence only taken at the point when the assessor has complete confidence in the person's competence over time and in various contexts
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence
where assessment is for the purpose of recognition (RCC/RPL), the evidence provided will need to be authenticated and show that it represents competency demonstrated over a period of time
assessment can be through simulated project-based activity and must include evidence relating to each of the elements in this unit
In all cases where practical assessment is used it will be combined with targeted questioning to assess the underpinning knowledge. Questioning will be undertaken in a manner appropriate to the skill levels of the operator, any cultural issues that may affect responses to the questions, and reflecting the requirements of the competency and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The candidate should demonstrate the ability to monitor, operate and control granular media filtration processes, including:
monitoring test results and processes
identifying and reporting faults
conducting routine plant inspections
taking samples and performing basic tests
making basic process adjustments according to instructions
collecting data and completing required documentation
Context of and specific resources for assessment
Access to the workplace and resources including:
documentation that should normally be available in a water industry organisation
relevant codes, standards, and government regulations
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the language and literacy capacity of the candidate and the work being performed.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice
a decision of competence only taken at the point when the assessor has complete confidence in the person's competence over time and in various contexts
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence
where assessment is for the purpose of recognition (RCC/RPL), the evidence provided will need to be authenticated and show that it represents competency demonstrated over a period of time
assessment can be through simulated project-based activity and must include evidence relating to each of the elements in this unit
In all cases where practical assessment is used it will be combined with targeted questioning to assess the underpinning knowledge. Questioning will be undertaken in a manner appropriate to the skill levels of the operator, any cultural issues that may affect responses to the questions, and reflecting the requirements of the competency and the work being performed.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M1931 | NWP354A | Monitor, operate and control granular media filtration processes | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVY12 | NWPTRT041 | Operate and control granular media filters | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D245 | NWP30107 | Certificate III in Water Operations | Qualification |