Unit of competency Outline

Date retreived
22/07/2026 11:38 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Propel and operate light on-track equipment

Propel and operate light on-track equipment

Unit of competency
National Code
TLIC2059
State Code
AVK12
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
19/10/2015
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
039907 - Rail Operations
Original Release Date
23/02/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to propel and operate light on-track equipment as part of workplace activities across a variety of rail operational contexts.It includes performing pre-operational equipment checks, obtaining approval to place equipment on track, operating light equipment on track and stabling or moving equipment off track. Light on-track equipment is considered to be less than 10 tonnes that may be lifted on or off track mechanically and may include:ballast scarifiersdog screw setters/driversjoint liftersmulti-spindle borerspower track jacksprofile grindersrail-mounted compressorssmall sleeper spacersspike driversspike pullers (ride on)various fastening applicators.Light on-track equipment requires a basic operator skill level in manipulation, coordination, alignment and functional activity, with little complexity or variance in overall activity. This typically covers equipment carrying out basic repetitive and alignment type activities.People achieving competence in this unit will need to fulfil the applicable state/territory legislated rail safety requirements, to comply with relevant codes of practice and/or guidelines, and to meet organisational requirements to operate each individual piece of equipment.Operators will need to have fulfilled licence and/or certification requirements for the type of equipment being used.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Perform pre-operational equipment checks
  • 1.1 Hazards are identified, risks are assessed and control measures are implemented
  • 1.2 Detailed pre-operational equipment checks are conducted in accordance with manufacturer specifications and organisational procedures
  • 1.3 Logbooks are checked and accurately completed as required, in accordance with organisational requirements and manufacturer specification
  • 1.4 Problems with equipment are identified and rectified in accordance with workplace procedures
  • 1.5 Identified problems are reported and documented in accordance with organisational procedures
2 Obtain approval to place equipment on track
  • 2.1 Protection officer or person in charge of work (PICOW) is contacted to obtain approval to place light on-track equipment on track and to move it to designated location in accordance with network owner’s procedures
  • 2.2 Communications with Network Control Officer is maintained using appropriate communications systems, in accordance with network owner procedures
  • 2.3 Approval is recorded in accordance with organisational procedures
3 Operate light equipment on track
  • 3.1 Equipment is travelled to designated location in accordance with network owner’s procedures
  • 3.2 Equipment is prepared for work
  • 3.3 Equipment is operated in a safe and efficient manner in accordance with relevant codes of practice, safeworking systems, manufacturer and organisational procedures
  • 3.4 Equipment is operated to meet organisational standards and specifications
  • 3.5 Warning systems are monitored and appropriately responded to as required during operation
4 Stable or off track equipment
  • 4.1 Protection officer or PICOW is contacted to direct where and when to stable or off track equipment
  • 4.2 Equipment is propelled to nominated stabling or off-track location
  • 4.3 Equipment is stabled or off tracked as directed
  • 4.4 Protection officer or PICOW is contacted and informed when light on-track equipment is stabled or off tracked
  • 4.5 Equipment is left stored in appropriate manner and location to ensure security and protection of equipment
5 Perform post-operational equipment procedures
  • 5.1 Post-operational equipment checks are conducted in accordance with manufacturer specifications and organisational procedures to identify defects and maintenance requirements
  • 5.2 Identified problems are reported in accordance with organisational procedures
  • 5.3 Post-operating service schedules are conducted in accordance with organisational procedures
6 Complete documentation
  • 6.1 Logbooks are checked and completed as required
  • 6.2 Documentation is completed and processed in accordance with organisational procedures
No information
No information
Replaces
State Code National Code Title Type
S8282 TLIC2059A Propel and operate light on-track equipment Unit of competency
Replaced By
State Code National Code Title Type
OCY86 TLIC0010 Propel and operate light on-track equipment Unit of competency