Unit of competency Outline

Date retreived
22/07/2026 3:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and operate groundwater regulation

Inspect and operate groundwater regulation

Unit of competency
National Code
NWPSOU052
State Code
AVY35
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
010711 - Hydrology
Original Release Date
15/04/2016
Nominal Hours
30
Description
This unit describes the skills required to inspect, operate, measure and report on groundwater usage and system performance.This unit applies to those working as field and operational staff with a specific responsibility for inspecting and checking groundwater sources.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS.Those undertaking this unit would work under indirect supervision while performing routine tasks in a familiar context, ensuring minimum damage to the environment. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and report on source performance and usage
  • 1.1 Carry out routine inspections of groundwater bores.
  • 1.2 Collect and record data on groundwater usage and/or bore levels.
  • 1.3 Collect and record water samples.
  • 1.4 Select, fit and use required safety equipment, including personal protective equipment.
2. Check pumps and meters
  • 2.1 Test bore pumps and check flow meters to determine accuracy.
  • 2.2 Adjust pumps and flow meters to conform to the allocation permit.
3. Operate and coordinate processes
  • 3.1 Measure and record extraction volumes.
  • 3.2 Check extraction volumes for compliance with entitlement.
4. Complete documentation
  • 4.1 Record inspection results.
  • 4.2 Report source data.
No information
No information
Replaces
State Code National Code Title Type
D1903 NWP321B Inspect and operate groundwater regulation Unit of competency
Replaced By
State Code National Code Title Type
OBO33 NWPCAD020 Inspect and operate groundwater regulation Unit of competency