Unit of competency Outline

Date retreived
22/07/2026 3:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install expansion joints

Install expansion joints

Unit of competency
National Code
MSFFL2043
State Code
OAJ80
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to install expansion joints and gaps, calculating how many and how often they are to be installed, and what size and type are necessary for the application at hand.This unit applies to flooring technicians working in accordance with pre-determined work orders.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify and follow work health and safety, legislative and organisational requirements
  • 1.2 Correctly identify work requirements and process from review of documentation
  • 1.3 Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations
  • 1.4 Select suitable expansion joints, cover strips, fixings and adhesives
  • 1.5 Select and check tools, equipment and materials prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • 1.6 Plan sequence of work to ensure efficiency and quality of installation
2. Set out expansion joints for installation
  • 2.1 Position expansion joints according to the requirements of the flooring type, manufacturer specifications and Australian Standards
  • 2.2 Organise timber or metal mouldings or cork expansion strip for fixing and use in accordance with relevant management requirements
  • 2.3 Prepare required adhesives and fixings for use in accordance with manufacturer instructions
  • 2.4 Establish working lines and starting point
3. Prepare expansion joints
  • 3.1 Follow instructions and sequence for cutting and fixing
  • 3.2 Lay out timber or metal mouldings to meet directional sequence, pattern match, specification requirements and to minimise waste and joins
  • 3.3 Maximise the aesthetics of the materials, where appropriate, matching grains and colours
  • 3.4 Accurately and clearly mark timber or metal moulding or cork expansion strip materials for cutting
  • 3.5 Cut timber or metal moulding or cork expansion strip to length and size for final fixing ensuring minimum waste
4. Install expansion joints
  • 4.1 Organise and use timber or metal mouldings or cork expansion strip for fixing in accordance with relevant safety management requirements
  • 4.2 Prepare and use required adhesives and mechanical fixings in accordance with manufacturer instructions
  • 4.3 Fit timber or metal mouldings or cork expansion strip to perimeter wall expansion gaps, expansion joints in the body of the floor or transition areas
  • 4.4 Inspect finished job and rectify any imperfections following workplace procedures
5. Complete housekeeping
  • 5.1 Store and recycle unused materials in accordance with workplace procedures
  • 5.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 5.3 Clean work area and dispose of rubbish safely
  • 5.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI357 MSFFL2027 Install expansion joints Unit of competency