Inspect, service and repair harvesting equipment

Unit of competency Outline

Date retreived
22/07/2026 9:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AURT300471B

State Code
WC283

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
20/12/2011

View on TGA

State Implementation and Classification

Approved Date

15/01/2013

Field of Education

030503 - Vehicle Mechanics

Original Release Date

15/01/2013

Nominal Hours

Description

This unit covers the competence required to carry out the inspection, service and repair of harvesting equipment.

Notes

Elements and Performance Criteria

1. Prepare to inspect harvesting equipment

1.1. Nature and scope of work requirements are identified and confirmed
1.2. OH&S requirements, including State/Territory regulatory requirements and personal protection needs are observed throughout work
1.3. Procedures and information such as workshop manuals, specifications, and tooling, are sourced
1.4. Method options are analysed and those most appropriate to the circumstances are selected and prepared
1.5. Technical and/or calibration requirements for inspecting harvesting equipment are sourced and support equipment is identified and prepared
1.6. Warnings in relation to working with harvesting equipment observed

2. Conduct inspection and analyse results

2.1. Methods for inspection are implemented in accordance with workplace procedures and manufacturer/component supplier specifications
2.2. Inspection results are compared with manufacturer/ component supplier specifications to indicate compliance or non-compliance
2.3. Results are documented with evidence and supporting information and recommendation(s) made
2.4. Report is processed in accordance with workplace procedures

3. Service and repair harvesting equipment

3.1. OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work
3.2. Procedures and information are identified and sourced
3.3. Technical and tool requirements for service and repair are identified and support equipment is identified and prepared
3.4. Methods for service and repair are implemented in accordance with workplace procedures and manufacturer/ component supplier specifications
3.5. Adjustments made during the service and repair are in accordance with manufacturer/component supplier specifications

4. Prepare equipment for operation

4.1. Variable operating parameters are identified from manufacturer/component supplier specifications and analysis of proposed working environment and conditions
4.2. Equipment variables, including management systems settings, controls and monitoring systems are established and prepared for proposed operations
4.3. Equipment and systems are test run and final adjustments are made to achieve and maintain operating parameters
4.4. Regulatory requirements, including equipment safety and environmental compliance, are applied and satisfied

5. Prepare equipment for use or storage

5.1. Service/repairs schedule documentation is completed
5.2. Final inspection is made to ensure protective guards, safety features and cowlings are in place
5.3. Final inspection is made to ensure work is to workplace expectations
5.4. Equipment is cleaned for use or storage to workplace expectations
5.5. Job card is processed in accordance with workplace procedures

No information

Replaces

State Code	National Code	Title	Type
W5028	AURT300471A	Inspect, service and repair harvesting equipment	Unit of competency

Replaced By

State Code	National Code	Title	Type
WF196	AURKTA3002	Inspect, service and repair harvesting equipment	Unit of competency