Unit of competency Outline

Date retreived
22/07/2026 2:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install marine electronic systems and components

Install marine electronic systems and components

Unit of competency
National Code
AURE321831B
State Code
D7592
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
12/10/2011
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to carry out the installation of marine low voltage electronic systems and components, including global positioning systems (GPS), depth sounders, fish finders, communications equipment and radar.It requires the ability to identify and confirm work requirements, prepare for, install and test marine low voltage electronic systems and components and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Source installation procedures and relevant workshop manuals and manufacturer information
  • 1.4. Determine installation method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
  • 1.5. Set up work area
2. Install marine electronic systems and components
  • 2.1. Carry out marine electronic systems and components installation in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Conduct pre-start checks, make required adjustments and re-test
  • 2.3. Determine the need for water testing
3. Clean up work area and maintain equipment
  • 3.1. Make final inspection of electronic systems
  • 3.2. Clean and inspect equipment and tooling according to workplace requirements
  • 3.3. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.4. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons, as required
  • 3.5. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2884 AURE321831A Install marine electronic systems/components Unit of competency
Replaced By
State Code National Code Title Type
WF342 AURRTR3002 Install marine electronic systems and components Unit of competency