Unit of competency Outline
Date retreived
22/07/2026 5:31 AM AWST
22/07/2026 5:31 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install temporary support members
Install temporary support members
Unit of competency
National Code
RIICTB302E
RIICTB302E
State Code
OCY17
OCY17
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to install temporary support members in civil construction, including excavating foundation sites, installing concrete footing and shoring systems, and fitting supplementary members. It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install temporary support members
- 1.1 Obtain, interpret, clarify and confirm work instructions
- 1.2 Access, interpret and apply documentation required to install temporary support members and confirm work activity is compliant
- 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
- 1.4 Select and wear personal protective equipment according to site requirements
- 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
- 1.6 Identify, address and report environmental issues, potential hazards and risks
- 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8 Identify, confirm, and locate materials required for work application
2. Install temporary foundations, bed-logs and shoring system
- 2.1 Excavate foundation installation site according to job requirements
- 2.2 Install bed-log or concrete footing according to job requirements
- 2.3 Install shoring system and prepare timbers according to job requirements
- 2.4 Install jack systems to restore deck level according to job requirements
- 2.5 Install braces according to job requirements
- 2.6 Install support brackets or piles according to job requirements
3. Install temporary members
- 3.1 Install fasteners according to job requirements
- 3.2 Install girders according to job requirements
- 3.3 Install supplementary members according to job requirements
4. Conduct clean-up activities
- 4.1 Clear work area and dispose of or recycle materials according to site requirements
- 4.2 Clean, check, perform maintenance on and store machinery, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH166 | RIICTB302D | Install temporary support members | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGL0 | RII30920 | Certificate III in Civil Construction | Qualification |