Unit of competency Outline

Date retreived
22/07/2026 1:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct electrical tests on LV electrical machines

Conduct electrical tests on LV electrical machines

Unit of competency
National Code
UEEEL0033
State Code
OCB53
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/11/2024
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to conduct electrical safety and functional inspections and tests of electrical machines designed to operate at low voltage (LV).It includes planning and conducting electrical inspections and tests on induction machines by working safely; setting up and conducting continuity, insulation and short circuit inspections and tests; and interpreting and documenting test results.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Notes
Elements and Performance Criteria
1 Prepare to conduct electrical inspections and tests on induction machines
  • 1.1 WHS/OHS requirements and workplace procedures for a given work area are identified and applied
  • 1.2 Existing WHS/OHS risk control measures for work preparation are followed
  • 1.3 Scope of work is determined from job specifications and regulatory requirements
  • 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others
  • 1.5 Winding data is obtained from winding data records or directly from measurements of stator and recorded in accordance with workplace procedures
  • 1.6 Materials required for the work are obtained in accordance with workplace procedures
  • 1.7 Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety
2 Conduct electrical inspections and tests on induction machines
  • 2.1 Existing WHS/OHS risk control work measures are followed
  • 2.2 Machines/equipment are inspected, checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Electrical inspection and tests are conducted to establish operational condition of the machine in accordance with workplace procedures and instructions
  • 2.4 Serviceability status of the machine is determined from inspection and test results and recorded
  • 2.5 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.6 Electrical testing is completed within timeframe, environment and workplace conditions
3 Complete workplace reports
  • 3.1 WHS/OHS work completion risk controls measures are followed
  • 3.2 Serviceability status of the machine is documented in accordance with workplace procedures and appropriate person/s notified
No information
No information
Replaces
State Code National Code Title Type
WC501 UEENEEG157A Conduct electrical tests on LV electrical machines Unit of competency