Unit of competency Outline

Date retreived
23/07/2026 10:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct landscape features using concrete

Construct landscape features using concrete

Unit of competency
National Code
AHCLSC302
State Code
BAN02
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040301 - Building Science And Technology
Original Release Date
12/01/2017
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to construct concrete structures and features as a component of landscape project works.This unit applies to individuals who take responsibility for own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Interpret plans and specifications
  • 1.2 Check the quantity and quality of materials
  • 1.3 Select tools and equipment and check for serviceability
  • 1.4 Identify hazards, assess risks and implement controls
  • 1.5 Select and use personal protective equipment (PPE)
  • 1.6 Identify and ameliorate environmental impacts of proposed concrete works
2. Set out and prepare the site
  • 2.1 Determine and locate services
  • 2.2 Mark out the position of the structure or feature according to plans
  • 2.3 Establish profiles to conform to the nominated tolerances
  • 2.4 Prepare subsoil by removing all debris, vegetable matter and topsoil to provide a solid foundation for concrete
  • 2.5 Install drainage systems according to plans and specifications
  • 2.6 Install form work to the site in a manner that will ensure it remains rigid during concrete pouring operations
  • 2.7 Place and compact sub-base material to the required finished levels
  • 2.8 Complete preparation of the site according to the type of structure or feature to be constructed
  • 2.9 Place reinforcement as designated in plans and specifications
3. Mix and pour concrete
  • 3.1 Determine proportions for concrete mix according to the strength requirements of the project
  • 3.2 Determine the volume of dry materials necessary to produce final concrete mix
  • 3.3 Mix together all dry ingredients and required additives to ensure a thorough blending of all materials is achieved
  • 3.4 Introduce sufficient water to produce a concrete mix to the required consistency
  • 3.5 Pour concrete to designated levels in a manner to avoid segregation of materials
  • 3.6 Consolidate concrete using an approved vibration method
4. Finish concrete
  • 4.1 Screed concrete to the desired finished level
  • 4.2 Trowel surface to desired finish
  • 4.3 Finish concrete off according to plans and specifications
5. Check quality of work and clean-up site
  • 5.1 Inspect the quality of finished works to ensure the required standard has been achieved
  • 5.2 Remove and clean form work to allow reuse
  • 5.3 Ensure all clean-up works minimise impact to the environment
  • 5.4 Clean, maintain and store tools and equipment
No information
No information
Replaces
State Code National Code Title Type
D6916 AHCLSC302A Construct landscape features using concrete Unit of competency
Replaced By
State Code National Code Title Type
ODU50 AHCLSC317 Construct landscape features using concrete Unit of competency