Unit of competency Outline

Date retreived
22/07/2026 7:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Trip casing

Trip casing

Unit of competency
National Code
RIIOGD302D
State Code
WH515
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to apply trip casing in Drilling.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for operations
  • 1.1 Access, interpret and apply trip casing documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select the personal protective equipment appropriate for the work activity
  • 1.5 Identify, locate and apply correct personal protective equipment
  • 1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on
  • 1.7 Confirm availability and status of necessary permits to work in accordance with operational and legislative requirements
  • 1.8 Confirm availability of necessary third party utilities
2. Prepare to trip casing
  • 2.1 Check grade or grades of casing
  • 2.2 Supervise crew in correctly positioning casing on racks
  • 2.3 Measure and record in writing casing
  • 2.4 Identify joint by the numerical order in which it will be run in the hole and its measured length
  • 2.5 Supervise crew to remove thread protectors, rabbit casing, clean and lubricate threads
  • 2.6 Check casing shoe and hanger joints for damage to threads, sealing surfaces and flapper valves where fitted
  • 2.7 Assemble and check operating conditions of casing running equipment, including slips, tongs, elevators, rubber clamp, protectors and tailing ropes
  • 2.8 Line up pumps to fill casing during running operation
3. Operate derrick during tripping of casing
  • 3.1 Steady casing during stabbing
  • 3.2 Release pick-up elevators
  • 3.3 Correctly align casing for make-up
  • 3.4 Latch side door or slip type elevators
  • 3.5 Relieve casing stabber during casing running operations
No information
No information
Replaces
State Code National Code Title Type
WB208 RIIOGD302A Trip casing Unit of competency
Replaced By
State Code National Code Title Type
AWB86 RIIOGD302E Trip casing Unit of competency