Unit of competency Outline
Date retreived
22/07/2026 1:11 AM AWST
22/07/2026 1:11 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble saddle components
Assemble saddle components
Unit of competency
National Code
LMTLG3007A
LMTLG3007A
State Code
W7392
W7392
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
15/10/2014
Nominal Hours
200
Description
This unit covers the skills and knowledge to fit, shape and assemble saddle components.
Notes
Elements and Performance Criteria
1 Interpret shaping and fitting requirements
- 1.1 Information about customer requirements for fitting and shaping is gathered and recorded
- 1.2 Saddle tree requirements are identified
- 1.3 Fitting and shaping requirements are identified
- 1.4 Attachments and Additional features are identified
- 1.5 Ordering requirements for saddle tree or associated materials and equipment are identified and documented
- 1.6 All identified requirements are documented and checked against original customer requirements, and any orders required are placed
2 Prepare to fit and assemble saddle
- 2.1 Assembly tasks are identified
- 2.2 Personal protective equipment is applied
- 2.3 Saddle tree is obtained, modified or constructed
- 2.4 Materials and equipment for saddle assembly are prepared
- 2.5 Saddle components are correctly identified and prepared
- 2.6 Work area is set up in accordance with task requirements, workplace procedures, and OHS practices
3 Fit and assemble saddle
- 3.1 Saddle tree is checked for quality and against horse dimensions, and further fitting consultation is undertaken with client or supervisor if required
- 3.2 Saddle pieces and padding are applied onto tree
- 3.3 Padding is fixed into position and saddle pieces are joined
- 3.4 Attachments and additional features are fixed into position
- 3.5 Shaped saddle is dried
4 Complete saddle assembly
- 4.1 Assembly of saddle is checked to ensure requirements are met, and further consultation with client or supervisor is undertaken if required
- 4.2 Saddle is checked for quality and correct assembly, and any defects are addressed and modifications made if possible
- 4.3 Saddle assembly is reviewed with customer or supervisor to ensure requirements are met
- 4.4 Assembly is finalised, and housekeeping and required documentation completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Information about customer requirements includes:
breed and size of horse for saddle
physical characteristics of horse, eg high-withered, short-backed, flat-backed
horse riding tasks, eg cutting, racing, working
weight requirements
padding requirements
Attachments include:
plates
rings
ties
stirrups
Additional features include:
desired leather stain
decorative elements
accessories
dyeing
stamping
lacing
Assembly tasks include:
obtaining, making and adjusting the saddle tree
marking
stitching
adding attachments
padding
shaping
fitting of saddle horn, bridle, rings
polishing
creasing
staining
finishing
Personal protective equipment includes:
gloves
apron and other protective clothing
masks used for applying polishes and stains
Materials and equipment includes:
mould or stand
drying or curing equipment
wetting agents
stitching tools
threads
padding
measuring tape
assembly instructions or specifications
Prepared includes:
cleaned
checked for foreign objects
sharpened (tools)
checked for faults or damage
Saddle tree is checked includes:
making sure the gullet is clear of the horse's backbone
checking the tree is soundly constructed
checking the tree is of suitable composition and weight for the intended purpose
checking the tree is aligned to specified swell and canter
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Required documentation includes:
shaping procedure/modifications applied
adjustments
customer order information
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Information about customer requirements includes:
breed and size of horse for saddle
physical characteristics of horse, eg high-withered, short-backed, flat-backed
horse riding tasks, eg cutting, racing, working
weight requirements
padding requirements
Attachments include:
plates
rings
ties
stirrups
Additional features include:
desired leather stain
decorative elements
accessories
dyeing
stamping
lacing
Assembly tasks include:
obtaining, making and adjusting the saddle tree
marking
stitching
adding attachments
padding
shaping
fitting of saddle horn, bridle, rings
polishing
creasing
staining
finishing
Personal protective equipment includes:
gloves
apron and other protective clothing
masks used for applying polishes and stains
Materials and equipment includes:
mould or stand
drying or curing equipment
wetting agents
stitching tools
threads
padding
measuring tape
assembly instructions or specifications
Prepared includes:
cleaned
checked for foreign objects
sharpened (tools)
checked for faults or damage
Saddle tree is checked includes:
making sure the gullet is clear of the horse's backbone
checking the tree is soundly constructed
checking the tree is of suitable composition and weight for the intended purpose
checking the tree is aligned to specified swell and canter
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Required documentation includes:
shaping procedure/modifications applied
adjustments
customer order information
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
interpret and apply saddle specifications
use saddlery tools and equipment
conduct assembly techniques
check work against specifications
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
interpret and apply saddle specifications
use saddlery tools and equipment
conduct assembly techniques
check work against specifications
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV24 | MSTLG3007 | Assemble saddle components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W375 | LMT30907 | Certificate III in Leather Production | Qualification |