Unit of competency Outline

Date retreived
22/07/2026 11:11 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service inboard engines and components

Service inboard engines and components

Unit of competency
National Code
AURR201104A
State Code
D7645
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to service inboard engines and components. It requires the ability to identify and confirm work requirements, service the inboard engines and to complete work finalisation processes. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Source service procedures and relevant workshop manuals and manufacturer's information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Decide service method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
  • 1.6. Set up work area
2. Service engine and engine components
  • 2.1. Conduct service in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Conduct pre-start checks, make required adjustments and re-test
  • 2.3. Apply appropriate lubricants to engine
  • 2.4. Check that protective guards, cowlings and safety features are in place according to workplace expectations
  • 2.5. Determine the need for water testing
3. Clean up work area and finalise work
  • 3.1. Seal engine orifices against ingress of foreign matter
  • 3.2. Clean engine according to workplace requirements
  • 3.3. Clean and inspect equipment and tooling according to workplace requirements
  • 3.4. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.5. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons as required
  • 3.6. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
WF326 AURRTE2003 Service inboard engines and components Unit of competency
State Code National Code Title Type
D541 AUR30511 Certificate III in Marine Qualification