Diagnose and repair motorcycle manual transmissions

Unit of competency Outline

Date retreived
23/07/2026 12:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AURJTX002

State Code
AXC90

TGA Status
Replaced

DTWD Status
Transition (Replaced)

Current Release Number
1.00

Current Release Date
14/04/2016

View on TGA

State Implementation and Classification

Approved Date

13/07/2016

Field of Education

030503 - Vehicle Mechanics

Original Release Date

13/07/2016

Nominal Hours

Description

This unit describes the performance outcomes required to diagnose and repair faults in the manual transmissions of motorcycles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1. Prepare to diagnose and repair motorcycle manual transmission

1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose manual transmission

2.1 Diagnostic tests are performed according to workplace procedures and safety and environmental requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair manual transmission

3.1 Repair information is sourced and interpreted
3.2 Repair options are analysed and those most appropriate to the circumstances are selected
3.3 Repair tools, equipment and materials are selected and checked
3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system
3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.5 Workplace documentation is processed according to workplace procedures

No information

Replaces

State Code	National Code	Title	Type
WF192	AURJTX3002	Diagnose and repair motorcycle manual transmissions	Unit of competency

Replaced By

State Code	National Code	Title	Type
OCJ24	AURJTX102	Diagnose and repair motorcycle manual transmissions	Unit of competency

State Code	National Code	Title	Type
BAG9	AUR30816	Certificate III in Motorcycle Mechanical Technology	Qualification