Unit of competency Outline

Date retreived
23/07/2026 9:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Position, set-up and operate portable traffic signals

Position, set-up and operate portable traffic signals

Unit of competency
National Code
RIIRTM202D
State Code
AWB80
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
14/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
14/07/2016
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to transport, position, , operate, commission/de-commission portable traffic signals and conduct housekeeping activities relevant to the task in the Civil construction industry.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to position, set-up and operate portable traffic signals
  • 1.1 Access, interpret and apply relevant traffic management plan / portable traffic signals documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Select and wear personal protective equipment appropriate for the work activity
  • 1.4 Identify, address and report potential risks, hazards and environmental issues and implement control measures
  • 1.5 Identify, confirm, clarify and apply environmental protection requirements
2. Transport portable traffic signals
  • 2.1 Conduct portable traffic signals pre-start check and report or rectify any faults
  • 2.2 Prepare portable traffic signals for transportation
  • 2.3 Secure trailer to vehicle
  • 2.4 Connect, manoeuvre and transport portable traffic signals
  • 2.5 Enter work site safely, observing relevant road rules, site and traffic management requirements
  • 2.6 Park-up and ensure braking system is engaged
  • 2.7 Check portable traffic signals controls and functions and report or rectify any faults
3. Position portable traffic signals
  • 3.1 Position portable traffic signals according to traffic management plan/diagram, and meeting traffic and site safety regulations and guidelines
  • 3.2 Conduct site specific risk assessment
  • 3.3 Ensure suitable positioning for battery purposes
  • 3.4 Ensure solar panels have adequate exposure to sunlight (where applicable)
  • 3.5 Position portable traffic signals with master unit control box on the non-traffic side of unit
  • 3.6 Confirm units are level, stable and wheel chocks are applied
  • 3.7 Ensure portable traffic signals visibility to road users
  • 3.8 Ensure posted speed limit is correct for operation of portable traffic signals
  • 3.9 Install relevant signage as per the traffic guidance scheme
  • 3.10 Initiate portable traffic signals security system
4. Operate communication devices
  • 4.1 Adjust communication device such as radio controls for optimum transmission and reception
  • 4.2 Transmit (radio) messages clearly and concisely
  • 4.3 Maintain communication device power supply
5. Commissioning portable traffic signals
  • 5.1 Select, apply and change signal sequence
  • 5.2 Monitor the traffic to ensure minimal delays to road users
  • 5.3 Seek approval for and make adjustments for changing conditions
6. De-commissioning and remove portable traffic signals from site
  • 6.1 Conduct shut-down procedures
  • 6.2 Prepare portable traffic signals for transportation
  • 6.3 Remove portable traffic signals safely from site, observing relevant road rules, site and traffic management requirements
7. Clean up
  • 7.1 Conduct inspection and fault finding in accordance with manufacturer's specifications and/or organisational requirements
  • 7.2 Carry out minor routine maintenance in accordance with organisational procedures
  • 7.3 Ensure tools and equipment are cleaned, checked, maintained and stored
No information
No information
Replaced By
State Code National Code Title Type
OCX25 RIIRTM202E Position, set-up and operate portable traffic signals Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification