Unit of competency Outline

Date retreived
23/07/2026 10:04 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dismantle and assemble multi-cylinder four-stroke petrol engines

Dismantle and assemble multi-cylinder four-stroke petrol engines

Unit of competency
National Code
AURTTE008
State Code
WI943
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/01/2015
View on TGA
State Implementation and Classification
Approved Date
26/06/2015
Field of Education
030503 - Vehicle Mechanics
Original Release Date
26/06/2015
Nominal Hours
35
Description
This unit describes the performance outcomes required to dismantle and reassemble a multi-cylinder four-stroke engine. It requires the learner to plan and prepare the task; dismantle the engine and inspect the components; reassemble the engine and check the engine operation; and maintain the work area, tools and equipment.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to dismantle and re-assemble a multi-cylinder four-stroke petrol engine
  • 1.1 Safety and environmental requirements are sourced and interpreted
  • 1.2 Task instruction is interpreted and engine to be worked on is identified
  • 1.3 Manufacturer specifications and workplace procedures for engine dismantle and assembly are sourced and interpreted
  • 1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.5 Tools and equipment required for dismantling and assembling multi-cylinder four-stroke petrol engine are identified according to manufacturer specifications
2. Dismantle engine and clean its components
  • 2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
  • 2.2 Engine is cleaned according tomanufacturer specifications and workplace procedures
  • 2.3 Engine is dismantled without causing damage to components, tools or equipment
  • 2.4 Engine components are cleaned and arranged for identification according to workplace procedures
3. Identify, inspect and measure engine components
  • 3.1 Measuring equipment and tools are selected and checked according to manufacturer specifications and workplace safety procedures
  • 3.2 Engine and components are measured and results compared against manufacturer specifications
  • 3.3 Engine bearing information is sourced and interpreted, and engine bearing type and associated loads are identified
  • 3.4 Information on engine seals, sealants and gaskets is sourced and interpreted, and engine seals, sealants and gaskets are identified
  • 3.5 Engine component inspection results are recorded
4. Inspect engine cooling system and components and identify type
  • 4.1 Information on the function, type and components of cooling system is sourced and interpreted
  • 4.2 Cooling system components are identified and inspected according to manufacturer specifications
  • 4.3 Cooling system component inspection results are recorded
5. Re-assemble engine and perform operational tests
  • 5.1 Information on engine seals, sealants and gaskets is sourced and interpreted
  • 5.2 Engine components are prepared for assembly according to manufacturer specifications and safety and environmental requirements
  • 5.3 Engine is re-assembled according to manufacturer specifications, and without causing damage to components, tools and equipment
  • 5.4 Engine is tested for correct assembly and operation
  • 5.5 Engine re-assembly and testing procedures are recorded
6. Complete work processes
  • 6.1 Final inspection is made to ensure work meets task instruction and workplace standards, and engine is presented ready for use or storage according to workplace procedures
  • 6.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  • 6.3 Tools and equipment are checked and stored in a condition ready for use according to workplace procedures, or tagged and reported where necessary
  • 6.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information