Unit of competency Outline

Date retreived
23/07/2026 7:54 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct slewing crane operations

Conduct slewing crane operations

Unit of competency
National Code
RIIHAN304D
State Code
WH310
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
50
Description
This unit describes a participant’s skills and knowledge required to conduct slewing crane operations in the Resources and Infrastructure Industries.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for slewing crane operations
  • 1.1 Access, interpret and apply crane operation documentation and procedures and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Access, interpret and apply safety information and procedures throughout the work activity
  • 1.6 Prepare work in accordance with AS2550, relevant legislation, safety requirements and manufacturer/site requirements
  • 1.7 Carry out assembly and dismantling of boom/jib
  • 1.8 Coordinate activities with others prior to commencement of, and during, the work activity
2. Operate slewing crane
  • 2.1 Carry out pre-start, start-up, park-up and shutdown procedures
  • 2.2 Position, stabilise and level crane prior to commencement of lift operations
  • 2.3 Prepare load for lift in accordance with crane limitations and rigging requirements
  • 2.4 Confirm the work area is clear and safe prior to commencing the lift
  • 2.5 Use crane controls and functions to lift and position loads or personnel
  • 2.6 Act on or report monitoring systems and alarms
  • 2.7 Recognise and respond to hazardous and emergency situations
  • 2.8 Complete work according to the agreed work plan
3. Travel crane
  • 3.1 Plan a firm and level route for the crane travel
  • 3.2 Identify and control hazards along the route
  • 3.3 Travel the crane
4. Perform multiple crane lift
  • 4.1 Obtain approval to carry out a multiple crane lift from the appropriate statutory authority
  • 4.2 Plan multiple lift and obtain approval for lifting plan by an authorised person
  • 4.3 Carry out the authorised plan under the supervision of and authorised person
5. Perform crane operator maintenance
  • 5.1 Perform slewing crane inspections and fault finding
  • 5.2 Conduct routine operational servicing, lubrication and housekeeping tasks
  • 5.3 Conduct minor operator maintenance
  • 5.4 Provide operator support during preparation for, and conduct of, major maintenance tasks
  • 5.5 Process records
No information
No information
Replaces
State Code National Code Title Type
WB698 RIIHAN304A Conduct slewing crane operations Unit of competency
Replaced By
State Code National Code Title Type
OAK84 RIIHAN304E Conduct slewing crane operations Unit of competency