Unit of competency Outline

Date retreived
22/07/2026 8:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct specialised timber deck systems

Construct specialised timber deck systems

Unit of competency
National Code
RIICTB310E
State Code
OCY20
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
55
Description
This unit describes the skills and knowledge required to construct specialised timber deck systems in civil construction. This includes stressing, resting and re-stressing bridge decks, installing bridge decks on location, fitting protection angles, kerbs and handrails, and waterproofing.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to construct specialised timber deck system
  • 1.1 Obtain, interpret, clarify and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to construct timber deck systems and confirm work activity is compliant
  • 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Construct bridge deck
  • 2.1 Select deck materials according to job requirements
  • 2.2 Pre-drill connection points according to job requirements
  • 2.3 Fix deck temporarily with nails according to job requirements
  • 2.4 Connect stressing cables to bridge deck
  • 2.5 Stress and rest bridge deck for timeframe according to job requirements
3. Install bridge deck
  • 3.1 Re-stress bridge deck
  • 3.2 Trim bridge deck according to job requirements
  • 3.3 Install bridge deck at location according to job requirements
  • 3.4 Bolt bridge deck to cross girders according to job requirements
  • 3.5 Re-stress bridge deck
  • 3.6 Pack stressing cable location holes with grease
  • 3.7 Fit protection angles, kerbs and handrails according to job requirements
  • 3.8 Apply waterproofing to deck and fittings
4. Conduct clean-up activities
  • 4.1 Clear work area and dispose of or recycle materials according to site requirements
  • 4.2 Clean, check, perform maintenance on and store machinery, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH174 RIICTB310D Construct specialised timber deck systems Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification