Construct custom furniture using advanced techniques

Unit of competency Outline

Date retreived
22/07/2026 8:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFFDM5001

State Code
ODZ60

TGA Status
Current

DTWD Status
Approved

Current Release Number
1.00

Current Release Date
03/06/2022

View on TGA

State Implementation and Classification

Approved Date

15/11/2022

Field of Education

030113 - Cabinet Making

Original Release Date

15/11/2022

Nominal Hours

160

Description

This unit describes the skills and knowledge required to construct original and unique custom furniture using or adapting traditional and innovative construction techniques. It includes interpreting and adapting design specifications that are compatible with the product material, purpose and style of the furniture.This unit applies to individuals working in a manufacturing or design studio environment who construct custom furniture, either alone or as part of an internal or external team.No licensing or legislative or certification requirements apply to this unit at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.

Notes

Elements and Performance Criteria

1. Prepare for work

1.1 Verify and ensure compliance with relevant legislative, work health and safety and workplace requirements related to constructing custom furniture
1.2 Read and interpret job specifications and other relevant documentation to identify furniture construction and finishing requirements
1.3 Select and check tools, equipment and materials prior to use to ensure that they are appropriate for work, serviceable and in safe condition
1.4 Identify product purpose, context, furniture style and construction materials
1.5 Plan and document work sequence covering each step in construction process, including sub-assemblies, in accordance with workplace requirements
1.6 Develop and document quality-checking procedures for each step in construction process

2. Curve and shape components

2.1 Identify, evaluate and confirm techniques for bending, forming and shaping components as being appropriate for construction requirement
2.2 Set out component specifications in accordance with work instructions and mark materials in accordance with industry practices
2.3 Use tools, machines and equipment in accordance with safety requirements and manufacturer specifications
2.4 Bend, form and shape materials in accordance with production plan and workplace procedures
2.5 Check components against specified tolerances, fit and accuracy

3. Veneer components

3.1 Identify, evaluate and select suitable veneer material from design specifications
3.2 Use tools, machines and equipment in accordance with safety requirements and manufacturer specifications
3.3 Measure, mark and cut veneer components to size based on job specifications
3.4 Prepare and lay out veneers for application
3.5 Select and prepare suitable joining processes for backing and adjacent veneers
3.6 Apply adhesives in accordance with workplace procedures or manufacturer instructions
3.7 Produce rough veneering components in accordance with production plan and workplace procedures
3.8 Complete final trim and finishing to specifications
3.9 Check work against required quality standards, and rectify any non-conformance

4. Make joints

4.1 Identify joints requirements and select type of joint to be used and adapt/design as necessary
4.2 Select tools, adhesives and fasteners to match joint type
4.3 Mark out cutting and joining lines to suit joint type
4.4 Check measurements and calculations for accuracy to ensure quality outcomes
4.5 Identify material features and observe optimal usage criteria
4.6 Cut material to specification, and inspect and prepare for joining
4.7 Join material in accordance with job specifications
4.8 Use fasteners and adhesives to make joints firm where required and in accordance with workplace procedures
4.9 Check finished joint against quality requirements

5 Construct sub-assemblies

5.1 Lay out components and materials, including adhesives, trims and accessories, and tools, in accordance with assembly plan
5.2 Check components against specification prior to assembly and reject items out of specification
5.3 Assemble sub-assemblies using appropriate tools, jigs and fixtures and check against specification for accuracy, fit, twist and distortion
5.4 Check sub-assembly quality against plans at identified checkpoints

6. Assemble custom furniture

6.1 Lay out components, sub-assemblies and materials, including adhesives, trims and accessories, and tools, in accordance with assembly plan
6.2 Check components and sub-assemblies against specification prior to assembly and reject items out of specification
6.3 Assemble components, fit using appropriate tools, jigs and fixtures, and check against specification for accuracy, fit, twist and distortion
6.4 Apply hardware and decorative accessories to specification
6.5 Prepare product for final finish, including the removal of bruises, scratches, dents and marks
6.6 Check product quality against plans at identified checkpoints

7. Finish furniture surface

7.1 Using samples of the type of material surface and specified finish, evaluate various finishing options and select the preferred option
7.2 Test sample of material with selected finishing technique to ensure appropriateness
7.3 Prepare furniture surface in accordance with finishing specification
7.4 Rectify imperfections, pores or nail or screw holes on surface
7.5 Apply finishing processes and materials in accordance with agreed specifications
7.6 Polish or buff surface depending on shine required from specification
7.7 Check work against required quality standards
7.8 Rectify any non-conformity with required quality standards

8. Complete housekeeping

8.1 Store or recycle unused materials as required
8.2 Clean and store tools and equipment in accordance with procedures
8.3 Tag and report faulty or defective equipment in accordance with workplace practices
8.4 Clean and clear work area in accordance with workplace procedures
8.5 Complete workplace documentation, including time log for operations for costing and business improvement activities.

No information

Replaces

State Code	National Code	Title	Type
WI300	MSFFDT5004	Construct custom furniture using advanced techniques	Unit of competency

State Code	National Code	Title	Type
BHR2	MSF50322	Diploma of Furniture Design and Manufacturing	Qualification