Unit of competency Outline

Date retreived
23/07/2026 7:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut and join sail panels

Cut and join sail panels

Unit of competency
National Code
LMTTF3006A
State Code
W7483
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
24/10/2014
Nominal Hours
60
Description
This unit covers the skills and knowledge required to cut and join sail panels for a range of sail types and sizes.
Notes
Elements and Performance Criteria
1 Lay up, plot and mark sail
  • 1.1 Sail design specifications are interpreted and clarified where necessary and sail type is identified
  • 1.2 Lay up instructions are interpreted
  • 1.3 Sailcloth width and quality are checked against lay-up instructions
  • 1.3 Lay marker is plotted on the sailcloth using computer or manual techniques
  • 1.4 Mark is copied manually or by computer on the sailcloth
  • 1.5 Marker and lay alignment are checked against design specifications and adjustments made as required
  • 1.6 Master copy of lay marker is stored as appropriate
2 Cut sail
  • 2.1 Sailcloth is laid out correctly using proper handling techniques
  • 2.2 Sailcloth is checked for faults or inconsistencies and appropriate action taken
  • 2.3 Cutting equipment is obtained and checked according to specifications for work.
  • 2.4 Sailcloth is cut according to OHS practices
  • 2.5 Cut sailcloth is inspected, any faults identified and appropriate action taken to ensure cut pieces meet required quality standards and design specifications
3 Join sail panels
  • 3.1 Required joining technique is identified according to design and sail specifications, and work area and resource requirements prepared
  • 3.2 Sailcloth surfaces are prepared, aligned, anchored, or otherwise stabilised for application of adhesive or sewing
  • 3.3 Sail panels are joined according to design specifications and OHS practices, including use of personal protective equipment
  • 3.4 Joining is continuously monitored for errors and to ensure correct alignment and integrity to design specifications
  • 3.5 Bonded joins are allowed to cure for specified time, using heat application where appropriate
  • 3.6 Sail is removed and bonded or sewn joins are informally inspected and tested for strength and accuracy against design specifications
  • 3.7 Faults and inconsistencies or discrepancies with design are identified and addressed
  • 3.8 Sail is transferred to next area for finishing and housekeeping and required production documentation are completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Sail type may include:
one design
cruising
cruiser and racing
racing yacht
sails for a range of boat sizes
Lay-up must include:
cross-cut, radial and membrane panel layouts
Sail cloth may include:
dacron
nylon
vinyl
canvas
wovens
spinnaker
laminet
composite sailcloth
Cutting equipment includes:
scissors
power tools
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Resource requirements may include
power tools
spray guns
portable ventilation fans
hot air dryers
heat lamps
sewing machines
needles
threads
adhesive applicators
cleaning cloths
solvents
Joining techniques may include
sewing, using a variety of stitch types
use of adhesives such as glue, tape and other bonding agents
combination of both sewing and adhesives
Personal Protective Equipment may include:
masks
goggles
aprons or other protective covers
gloves
Required production documentation may include:
record of inconsistencies or faults
record of adhesives used
instructions for finishing
production information
time and date
labelling
packing or transfer information
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
interpret and apply sail design specifications
accurately lay up, mark and plot design
cut and join sailcloth
identify faults, inconsistencies and discrepancies
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment

Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.

Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaced By
State Code National Code Title Type
BAU47 MSTTF3006 Cut and join sail panels Unit of competency