Unit of competency Outline

Date retreived
22/07/2026 3:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test engines using a dynamometer

Test engines using a dynamometer

Unit of competency
National Code
AURMTE101
State Code
OCJ73
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
31/03/2021
Nominal Hours
32
Description
This unit describes the skills and knowledge required to test engines using a dynamometer. The engines being tested may be in a vehicle or stand alone. It involves preparing for the task, selecting the correct test procedure, carrying out testing, analysing test results, and completing workplace processes and documentation. It involves setting up and conducting dynamometer tests on engines, and logging, analysing and reporting the test data in order to maximise engine performance.The unit applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for dynamometer operation
  • 1.1 Determine job requirements from test information
  • 1.2 Check dynamometer for calibration and serviceability according to manufacturer and workplace procedures
  • 1.3 Select and check tools, equipment and materials for serviceability
  • 1.4 Identify hazards associated with the work and manage risks according to safety and environmental requirements
  • 1.5 Check engine or vehicle prior to testing according to manufacturer and workplace procedures
  • 1.6 Check and secure engine or vehicle connections to dynamometer according to manufacturer, workplace and safety procedures
2. Conduct dynamometer testing
  • 2.1 Determine required load and run sequence and test parameters
  • 2.2 Carry out selected dynamometer testing sequence according to manufacturer and team procedures and safety requirements, and document data
  • 2.3 Calculate correction factors and apply to data
3. Analyse test results
  • 3.1 Analyse dynamometer test data and draw conclusions about condition and performance of engine and associated systems according to manufacturer specifications and workplace procedures
  • 3.2 Report findings based on dynamometer data according to workplace procedures
  • 3.3 Test recommended engine modifications on dynamometer according to manufacturer and workplace procedures and safety requirements, and document data
  • 3.4 Present data to team members according to workplace procedures
4. Complete work processes
  • 4.1 Carry out dynamometer shutdown procedure according to manufacturer and workplace procedures and safety requirements
  • 4.2 Disconnect engine from dynamometer according to manufacturer and workplace procedures
  • 4.3 Check and maintain dynamometer and associated equipment according to workplace procedures
  • 4.4 Check and store tools and equipment according to workplace procedures
  • 4.5 Process workplace documentation, including dynamometer test results, according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXB92 AURMTE001 Test engines using a dynamometer Unit of competency