Unit of competency Outline
Date retreived
22/07/2026 10:55 PM AWST
22/07/2026 10:55 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Machine sew using specific techniques
Machine sew using specific techniques
Unit of competency
National Code
LMFSF2003B
LMFSF2003B
State Code
W8759
W8759
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/09/2008
Nominal Hours
56
Description
This unit covers the competency to use specific sewing machine techniques, with attachments as required, to produce specialised sewn products.
Notes
Elements and Performance Criteria
1. Identify sewing machine equipment controls and procedures
- 1.1. Job requirements are identified from work instructions
- 1.2. OHS requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
- 1.3. Equipment operations, components and controls are identified
- 1.4. Operating procedures are checked to identify approved procedures and adjustments
- 1.5. Inspection procedure for materials quality and equipment condition is identified
- 1.6. The process for obtaining materials and moving products to the next process is identified
2. Prepare for work
- 2.1. Work order or sample is checked to identify exact sewing specification
- 2.2. Materials are inspected before use and problems, including any materials or part constructed products which do not meet the job order requirements are identified and reported
- 2.3. Work pieces are laid out in sequence in accordance with specifications and workplace procedures
- 2.4. Any required supplementary equipment is identified for routine lubrication and adjustments
3. Adjust and control sewing machine operations
- 3.1. Sewing machine (including attachments as required) set up requirements and adjustments are identified and followed
- 3.2. Machine sewing maintains required product quality and outputs
- 3.3. Material which is able to be reused is collected and stored, and waste and scrap is removed in accordance with workplace procedures
- 3.4. Equipment and work area clean up are completed following workplace procedures
4. Maintain quality requirements
- 4.1. Sewing machine operations and fabrics are monitored and anything which may affect quality is reported
- 4.2. Finished products are:
- 4.2.1. checked for required quality
- 4.2.2. repaired (where applicable)
- 4.2.3. moved to the next process
- 4.3. Authorised changes in operating procedures and work requirements are implemented
5. Dispatch completed work
- 5.1. Production records and/or packing slips are completed in accordance with workplace procedures
- 5.2. Completed work in directed to the next operation in accordance with workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the operation of industrial sewing machines to produce specialised products in soft furnishing, upholstery and mattress and base making
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines
Sewing specifications include:
required materials
threads
additional work features
shape and special requirements for the gathered item
any required workplace documentation to be completed
Specific and specialised techniques and products include:
sewing decorative finishes, including:
patchwork and flat bed quilting
applique and freehand embroidery
top stitching
invisible zips
mitre corners
capping
sewing labels
sewing with specialised attachments, including:
rolled hems
ribboning
gathering
embroidery hoops
bias binding
sewing fasteners and attachments, including:
zips
hooks
rings
velcro
press studs
buttons
buttonholes
tapes and attachments appropriate for the furnishing industry
operating an outline sewing machine
Machines may include, but are not limited to:
flange
overlocker
flat bed
blind hemming
gathering
tape edging
Sewing machine set up and adjustment includes:
threading machine and winding bobbin
setting required tensions
selecting required machine settings
lubricating and adjusting the machine (where required) and testing operations for work order requirements
Materials to be machined may include but are not limited to:
fabrics and leathers
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the operation of industrial sewing machines to produce specialised products in soft furnishing, upholstery and mattress and base making
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines
Sewing specifications include:
required materials
threads
additional work features
shape and special requirements for the gathered item
any required workplace documentation to be completed
Specific and specialised techniques and products include:
sewing decorative finishes, including:
patchwork and flat bed quilting
applique and freehand embroidery
top stitching
invisible zips
mitre corners
capping
sewing labels
sewing with specialised attachments, including:
rolled hems
ribboning
gathering
embroidery hoops
bias binding
sewing fasteners and attachments, including:
zips
hooks
rings
velcro
press studs
buttons
buttonholes
tapes and attachments appropriate for the furnishing industry
operating an outline sewing machine
Machines may include, but are not limited to:
flange
overlocker
flat bed
blind hemming
gathering
tape edging
Sewing machine set up and adjustment includes:
threading machine and winding bobbin
setting required tensions
selecting required machine settings
lubricating and adjusting the machine (where required) and testing operations for work order requirements
Materials to be machined may include but are not limited to:
fabrics and leathers
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Apply safe handling practices for equipment, products and materials
To be assessed as competent in at least one of the following:
sewing decorative finishes (competence must be achieved in at least one finish)
sewing with specialised attachments (competence must be achieved in at least three attachments/processes)
sewing fasteners and attachments
operating an outline sewing machine
Assessment must confirm appropriate knowledge and skills to:
identify and operate sewing machines
set up sewing machine for operations and monitor quality of output
interpret work order and locate and apply relevant information
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate sewing machine, work orders, operating procedures, materials and threads.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Apply safe handling practices for equipment, products and materials
To be assessed as competent in at least one of the following:
sewing decorative finishes (competence must be achieved in at least one finish)
sewing with specialised attachments (competence must be achieved in at least three attachments/processes)
sewing fasteners and attachments
operating an outline sewing machine
Assessment must confirm appropriate knowledge and skills to:
identify and operate sewing machines
set up sewing machine for operations and monitor quality of output
interpret work order and locate and apply relevant information
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate sewing machine, work orders, operating procedures, materials and threads.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0373 | LMFSF2003A | Machine sew using specific techniques | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI618 | MSFSF2003 | Machine sew specialised sewn products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W027 | LMF20702 | Certificate II in Soft Furnishing | Qualification |
| W037 | LMF30902 | Certificate III in Soft Furnishing | Qualification |