Unit of competency Outline

Date retreived
23/07/2026 2:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Arc weld reinforcement steel

Arc weld reinforcement steel

Unit of competency
National Code
CPCCSF2005
State Code
OCM93
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
01/06/2021
Nominal Hours
32
Description
This unit specifies the skills and knowledge required to arc weld reinforcement to non-load bearing structural components as part of the construction process. It does not include specialist welding techniques.It includes planning and preparing for the work, setting up for welding, welding the reinforcement, checking the reinforcement and completing clean-up activities.It applies to those who work under the direction of more experienced workers to arc weld reinforcement steel. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to arc weld reinforcement steel.
  • 1.1 Read work order and associated documentation and clarify work tasks with relevant persons.
  • 1.2 Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
  • 1.3 Identify hazards and determine risk controls.
  • 1.4 Select plant, tools and equipment, check for serviceability and rectify or report any faults.
  • 1.5 Calculate materials quantities.
2 Prepare work area to arc weld reinforcement steel.
  • 2.1 Erect required safety signage and barricades and fit personal protective equipment (PPE).
  • 2.2 Obtain, prepare, and safely handle materials and locate them ready for use.
  • 2.3 Select fire extinguisher and locate so it is readily accessible before and during operations.
  • 2.4 Clean area of flammable material, scale and loose residual debris from reinforcement before welding.
3 Arc weld reinforcement steel.
  • 3.1 Weld reinforcement in accordance with job specifications and workplace requirements.
  • 3.2 Carry out tack welds to meet specifications relating to the diameter of the bar.
  • 3.3 Carry out welding at the required distance from bends or re-bends of reinforcement bars.
4 Check reinforcement before use.
  • 4.1 Check location and position of reinforcement and fixing ties for accuracy.
  • 4.2 Check depth of coverage, clearance, spacing and overlap before use.
5 Clean up.
  • 5.1 Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
  • 5.2 Clean, check, maintain and store plant, tools and equipment in accordance with manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9505 CPCCSF2005A Arc weld reinforcement steel Unit of competency
State Code National Code Title Type
BGB8 CPC30220 Certificate III in Carpentry Qualification
BGC4 CPC31120 Certificate III in Steelfixing Qualification